Manual

3. When you pull out the input tray, one or all the Paper Size Selection lights will blink (see Control
panel lights reference for printer lights behaviors).
If you are loading a different sized paper, change the paper size for the printer, see
Set the
paper size for the printer.
4. Slide the paper-width guides out as far as possible.
5. Insert the paper print-side down in the center of the tray.
Ensure that the stack of paper is aligned with the appropriate paper size lines on the bottom of
the input tray, and does not exceed the stack height marking on the side of the tray.
NOTE: Do not load paper while the printer is printing.
6. Slide the paper-width guides in the tray until they touch the edge of the stack of paper, and then
close the tray.
20 Chapter 2 Get started ENWW