User Guide

Table 2-2 Power button and Resume button
Light description/Light pattern
Explanation and recommended action
The Power light and the Resume light blink.
One of the following problems might have occurred.
1. Print media is jammed in the printer.
○
Locate and clear the jam. For more information, see Clear paper jams.
Press the ( Resume ) button to continue printing.
2. The printer carriage has stalled.
○
Open the ink cartridge access door and remove any obstructions (such as jammed paper).
○
Press the ( Resume ) button to continue printing.
○
If the error persists, turn the printer o, and then on again.
To cancel the print job, press the ( Cancel ) button.
The Power light is on and the Resume light blinks.
One of the following problems might have occurred.
1. The printer is out of paper.
○
Load paper and press the ( Resume ) button to continue printing.
2. There is a paper mismatch.
Either load paper that matches the paper settings of the printer or change the paper settings through
one of the following ways:
○
Press the ( Paper Size Selection ) button on the printer to select the desired paper size.
○
Change the setting in the HP print driver or in the embedded web server.
Press the ( Resume ) button to continue printing.
ENWW Use the printer control panel 7