User Guide

Table 2-7 Paper Size Selection button and lights (continued)
Light description/Light pattern
Explanation and recommended action
For more information, see the earlier case when one of the Paper Size Selection lights is on.
All Paper Size Selection lights are o.
This occurs when the paper size currently set for the printer is not one of the sizes listed on the printer
control panel; that is, it is not represented by any of the Paper Size Selection lights.
You can still print, but be sure to load paper that matches the paper settings of the printer.
All Paper Size Selection lights are blinking.
This occurs if you pull out the input tray when the paper size currently set for the printer is not listed on the
printer control panel.
—
If you have loaded a dierent standard paper size, choose the appropriate paper size by pressing the
button until the light matches the loaded paper size.
—
Once you are done checking paper or loading the correct paper, close the tray properly. The lights will
stop blinking and turn o. For more information, see the earlier case when all the Paper Size Selection
lights are o.
If you have loaded a dierent paper size, set the paper size in the printer to match (see Set the paper
size for the printer)
—
If you press the button once when the lights are blinking, blinking will also stop and the lights will turn
o.
If you press the button again, the top light will turn on and the corresponding paper size will be
selected. For more information, see earlier descriptions.
The Paper Size Selection lights are cycling or blinking in sequence one after another from top to bottom (for
about 10 seconds).
This occurs when you select the printer from your mobile device and the device gets connected to the
printer.
—
After the connection is made, the lights will blink in sequence for about 10 seconds and revert to the
state before the connection was made. For more information, see the other Paper Size Selection light
patterns.
—
If you press the button once when the lights are blinking, blinking will stop and the lights will revert to
the previous state.
If you press the button again, the next light will turn on and the corresponding paper size will be
selected. For more information, see earlier descriptions.
ENWW Use the printer control panel 15