User Guide

NOTE: If you change the Paper Size ensure that you have loaded the correct paper and set the
paper size on the printer control panel to match.
b. From the pop-up menu, choose Paper Type/Quality, and then choose the following settings:
●
Paper Type: The appropriate paper type
●
Quality: Maximum dpi
4. Select any other print settings that you want, and then click Print.
Tips for print success
Software settings selected in the print driver only apply to printing.
You can print your document on both sides of the paper. For more information, see Print on both sides
(duplexing).
Ink tips
●
If the print quality is not acceptable, see Print quality diagnostic report for more information.
●
Use Original HP ink cartridges.
●
Install both the black and color cartridges correctly.
For more information, see Replace the ink cartridges.
●
Check the estimated ink levels in the cartridges to make sure there is suicient ink.
For more information, see Check the estimated ink levels.
●
Always turn o the printer with the ( Power ) button to allow the printer to protect the nozzles.
Paper loading tips
For more information, also see Load paper.
●
Ensure the paper loaded in the tray matches the currently set paper size for the printer. For more
information, see Set the paper size for the printer.
●
Load a stack of paper (not just one page). All the paper in the stack should be of the same size and type
to avoid a paper jam.
●
Load paper with the print-side down.
●
Ensure that paper loaded in the input tray lays at and the edges are not bent or torn.
●
Adjust the paper-width guides in the input tray to t snugly against all paper. Make sure the guides do
not bend the paper in the tray.
Printer settings tips (Windows)
●
To change default print settings, click Print , and then click Set Preferences in the HP printer software.
For information on opening your HP printer software, see Open the HP printer software (Windows).
●
To select the number of pages to print per sheet, on the Layout tab of the printer driver, select the
appropriate option from the Pages per Sheet drop-down list.
NOTE: The preview on the Layout tab cannot reect what you select from the Pages per Sheet
Layout, the Booklet, or the Page Borders drop-down lists.
34 Chapter 3 Print ENWW