Administrator's Guide

Description
Displays the current date, time, and time zone settings of the internal Real Time Clock of the
Enclosure Manager.
Restrictions
None
SHOW DEVICE SERIAL_NUMBER BLADE
Syntax
SHOW DEVICE SERIAL_NUMBER BLADE <bay#>
Description
Displays the serial number of the blade specified by the bay <bay#>.
Restrictions
Can be used only when enclosure power is on, blade is present, and iLO is communicating to EM
properly. If enclosure power is off, the EM has no signal from the blade to determine whether it is
present, and iLO in the blade has no power to report its serial number. The EM reports ‘[Unknown]’
if this command is used with enclosure power off.
SHOW DISPLAY EVENTS
Syntax
SHOW DISPLAY EVENTS
Description
Displays the current status of the display event setting.
Restrictions
None
SHOW EM
Syntax
SHOW EM INFO
Description
Displays information about the Enclosure Manager.
1
Restrictions
None
Example
EM-78E7D1C12074> show em info
Enclosure Manager information:
Product Name : HP CSP EMU
Part Number : 620022-001
Serial Number : PBCYUAX9VZ6062
UUID : 99PBCYUAX9VZ6062
Manufacturer : HP
Firmware Ver. : 1.00 Nov 08 2010
1. Hardware versions are A, B, C, and so forth. Aux info includes the change management SubVersion number and the
health monitor PSoC firmware version number. Both are needed occasionally in lab testing environments. In production
environments, the HM version may sometimes be needed, and this command is the only way to find it in v1.0 EM
firmware.
CLI reference 161