Computer Setup (F10) Utility Guide

22 www.hp.com Computer Setup (F10) Utility Guide
Computer Setup (F10) Utility
Advanced*
(continued)
Device Options Allows you to set:
• Printer mode (bi-directional, EPP & ECP,
output only).
• Num Lock state at power-on (off/on).
• S5 Wake on LAN (enable/disable).
• To disable Wake on LAN during the off
state (S5), use the arrow (left and right)
keys to select the Advanced > Device
Options menu and set the S5 Wake on
Lan feature to “Disable.” This obtains the
lowest power consumption available on the
computer during S5. It does not affect the
ability of the computer to Wake on LAN
from suspend or hibernation, but will
prevent it from waking from S5 via the
network. It does not affect operation of the
network connection while the computer is
on.
• If a network connection is not required,
completely disable the network controller
(NIC) by using the arrow (left and right)
keys to select the Security > Device
Security menu. Set the Network
Controller option to “Device Hidden.” This
prevents the network controller from being
used by the operating system and reduces
the power used by the computer in S5.
• Processor cache (enable/disable).
*For advanced
users only.
Computer Setup (Continued)
Heading Option Description
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.