Desktop Management Guide

18 www.hp.com Desktop Management Guide

14. As soon as the computer is turned on, press and hold the F10 key

until you enter Computer Setup. Press

Enter to bypass the title

screen, if necessary.

15. Go to Advanced > PCI Devices and re-enable the PATA and

SATA controllers that were disabled in step 6. Put the SATA

controller on its original IRQ.

16. Save the changes and exit. The computer will boot to the USB

flash media device as drive C.

✎

The default boot order varies from computer to computer, and it can

be changed in the Computer Setup (F10) Utility. Refer to the

Computer Setup Guide on the Documentation CD for instructions.

If you have used a DOS version from Windows 9x, you may see a

brief Windows logo screen. If you do not want this screen, add a

zero-length file named LOGO.SYS to the root directory of the USB

flash media device.

Return to “Copying to Multiple Computers” on page 11.