Computer Setup (F10) Utility Guide

8 www.hp.com Computer Setup (F10) Utility Guide
Computer Setup (F10) Utility
Advanced
BIOS Features
(continued)
Network Boot Seq. Allows you to specify the order in which
network devices (including UP NIC cards)
are checked for a bootable operating
system image.
Quick Power On Self Test Disables/enables the system to skip certain
tests while booting.
Enabling this feature decreases the time
required to boot the system.
F9 Boot Menu Disables/enables Boot Menu
First Boot Device
Second Boot Device
Third Boot Device
Fourth Boot Device
Allows you to specify which devices will
boot first, second, third, and fourth, or to
disable any of the four:
•Removable
• Hard Disk
•CDROM
•Network
•Disabled
✎
MS-DOS drive lettering assignments
may not apply after a non-MS-DOS
operating system has started.
Boot Up NumLock Status Allows you to set the default NumLock status
off or on.
Security Option Allows you to set the security option to Setup
or Always.
APIC Mode Disables/enables the APIC mode.
MPS Version Control for OS Allows you to set the MPS table version to:
•1.1
•1.4
Computer Setup (Continued)
Heading Option Description
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.