Computer Setup (F10) Utility Guide

Computer Setup (F10) Utility Guide www.hp.com 13
Computer Setup (F10) Utility
Power
Management
Setup
(continued)
Resume Time (hh:mm:ss) If RTC Alarm Resume is enabled, allows you
to select what time the RTC alarm will
resume.
PnP/PCI
Configuration
Reset Configuration Data Disables/enables automatic reconfiguration.
Default is Disabled. Select Enabled to reset
Extended System Configuration Data (ESCD)
when you exit Setup, if you have installed a
new add-on and the system reconfiguration
has caused such a serious conflict that the
OS cannot boot.
Resources Controlled By Allows you to select whether resources are
controlled automatically or manually:
• Auto (ESCD–Extended Storage
Configuration Data)
•Manual
BIOS can automatically configure all the
bootable and Plug-and-Play-compatible
devices. If you choose Auto, you cannot
select IRQ, DMA and memory base address
fields, since BIOS automatically assigns
them.
Computer Setup (Continued)
Heading Option Description
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.