Computer Setup (F10) Utility Guide

14 www.hp.com Computer Setup (F10) Utility Guide
Computer Setup (F10) Utility
PnP/PCI
Configuration
(continued)
IRQ Resources
•IRQ-3 assigned to
•IRQ-4 assigned to
•IRQ-5 assigned to
•IRQ-7 assigned to
• IRQ-10 assigned to
• IRQ-11assigned to
• IRQ-14assigned to
• IRQ-15assigned to
When resources are controlled manually,
allows you to assign each system interrupt a
type, depending on the type of device using
the interrupt.
Legacy ISA for devices compliant with the
original PC AT bus specification, PCI/ISA
PnP for devices compliant with the Plug and
Play standard whether designed for PCI or
ISA bus architecture.
Assign IRQ for VGA Disables/enables capability of assigning
IRQ for VGA.
Assign IRQ for USB Disables/enables capability of assigning
IRQ for USB.
PC Health
Status
System Information Lists:
•CPU Temperature
•System Temperature
•CPU Fan Speed
•System Fan Speed
System Fan Fail Check Disables/enables detection of fan failure
during POST.
Fan Control Sets fan speed control to auto or disables it.
Load
Optimized
Defaults
Allows you to reset Computer Setup to
factory defaults.
Set Supervisor
Password
Allows you to establish a password to
control access to Computer Setup.
Set User
Password
Allows you to establish a password to
control access to the computer.
Computer Setup (Continued)
Heading Option Description
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.