Getting Started

14 www.hp.com Getting Started
Getting Started
■ If the system has multiple video sources (embedded, PCI, or
PCI-Express adapters) installed (embedded video on some
models only) and a single monitor, the monitor must be
plugged into the monitor connector on the source selected as
the primary VGA adapter. During boot, the other monitor
connectors are disabled and if the monitor is connected into
these ports, the monitor will not function. You can select
which source will be the default VGA source in Computer
Setup.
Ä
CAUTION: When the computer is plugged into an AC power
source, there is always voltage applied to the system board. You must
disconnect the power cord from the power source before opening the
computer to prevent system board or component damage.