Hardware Reference Guide - dc7600 SFF

Hardware Reference Guide www.hp.com 2-33
Hardware Upgrades
Upgrading the SATA Hard Drive
✎
HP does not support connecting both SATA and 3.5-inch PATA hard
drives on the same system.
Removing and Replacing the Primary Hard Drive
✎
Make sure to back up the data on the old hard drive before removing
it so that you can install the data onto the new hard drive.
The preinstalled 3.5-inch hard drive is located under the power
supply. To remove and replace the hard drive:
1. If you have locked the Smart Cover Lock, restart the computer
and enter Computer Setup to unlock the lock.
2. Turn off the computer properly through the operating system,
then turn off any external devices.
3. Disconnect the power cord from the power outlet and disconnect
any external devices.
4. Remove the computer cover. Refer to “Removing the Computer
Cover.”