Owner manual

Removing the hard drive
To remove a hard drive:
1. Save your work and shut down the computer.
2. Disconnect AC power and external devices connected to the computer.
3. Turn the computer upside down on a flat surface.
4. Remove the service door (see
Removing or replacing the service door on page 49) and the
battery (see
Inserting or removing the battery on page 38).
5. Loosen the 4 hard drive door screws (1). Pull the cloth hard drive tab (2) upwards, and then
remove the drive.
Installing a hard drive
NOTE: Your computer may look slightly different from the illustration in this section.
To install the hard drive:
1. Place the hard drive into the hard drive bay, (1), ensuring that the cloth tab remains on top.
Using hard drives 51