HP EliteDisplay S240ml Monitor User Guide
© 2014 Hewlett-Packard Development Company, L.P. Microsoft and Windows are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
About this guide This guide provides information on monitor features, setting up the monitor, and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important supplemental information.
iv About this guide
Table of contents 1 Product features ............................................................................................................................................. 1 2 Setting up and using the monitor .................................................................................................................. 3 Attaching the monitor stand base ......................................................................................................... 3 Rear components .....................
Product support .................................................................................................................................. 26 Appendix A Technical specifications ............................................................................................................ 27 HP S240ml ......................................................................................................................................... 27 Recognizing preset display resolutions ........................
1 Product features The LCD (liquid crystal display) monitor has an active matrix, wide viewing angle panel. The monitor features include: ● 60.5-cm (23.8-inch) diagonal viewable area display with 1920 x 1080 resolution, plus full-screen support for lower resolutions; includes custom scaling for maximum image size while preserving original aspect ratio ● Ultra-slim bezel IPS monitor ● MHL (mobile high-definition link) 2.
2 ● Audio input jack with audio cable included ● Integrated webcam and dual microphone array ● Integrated speakers ● Audio output headphone jack ● Supports Windows 7 and Windows 8 operating systems only ● Plug and play capability on Windows 7 and Windows 8 ● Security slot provision on rear of monitor for optional cable lock ● On-screen display (OSD) adjustments in several languages for easy setup and screen optimization ● HDCP (High-Bandwidth Digital Content Protection) copy protection on
2 Setting up and using the monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, and then follow the instructions below. CAUTION: The screen is fragile. Avoid touching or applying pressure to the screen; doing so can cause damage. Attaching the monitor stand base 1. Remove the monitor with attached stand from its box and lay it on a flat surface covered by a clean, dry cloth. 2. Remove the cover from the base. 3.
4 4. Rotate the stand base upward so that the flat bottom of the stand riser is fully seated within the recess of the stand base (2). 5. Tighten the captive screw on the underside of the base to secure the base to the stand.
6. Tilt the stand base cover and first insert the edge away from the stand (1), and then press the cover down to snap the cover into place (2).
Rear components Component Description 1 Headphone jack Connects the headphone cable (not included) to the monitor. 2 MHL/HDMI connector Connects the MHL cable to the monitor. Can also be used to connect the HDMI cable to the monitor. 3 USB 3.0 (2) connector Connects the USB cable or device to the monitor. 4 DC power connector Connects the DC power cable to the monitor. 5 DisplayPort connector Connects the DisplayPort cable to the monitor.
Connecting the cables NOTE: Use only the video cable(s) included with the monitor. Connecting the cables may be easier if you first lay the monitor panel face down on a flat surface covered by a clean, dry cloth. 1. Rotate the bottom of the cable cover up (1) then slide out the top of the cover (2) to remove it.
2. Depending on your configuration, connect either the DisplayPort, HDMI, or VGA video cable between the source device and the monitor. NOTE: The video mode is determined by the video cable used. The monitor will automatically determine which inputs have valid video signals. The inputs can be selected by pressing the Input button on the side panel or through the On-Screen Display (OSD) feature by pressing the Menu button.
● 3. For VGA analog operation, connect the VGA signal cable to the VGA connector on the rear of the monitor and the other end to the VGA connector on your input device (cable provided). Connect the provided MHL cable to the MHL/HDMI connector on the side of the monitor and the other end of the cable to the Micro USB connector on the mobile device. NOTE: For more information, see Using mobile high-definition link (MHL) on page 24.
4. Connect one end of the provided USB cable to a USB connector on the rear panel of the computer, and the other end to the USB connector on the monitor. NOTE: You must connect the USB cable between the computer and monitor for webcam functionality. 5. 10 Connect a USB device to a USB connector on the side of the monitor.
6. Connect a headphone cable to the headphone jack on the side of the monitor. 7. Connect the provided audio cable to the audio input connector on the rear of the monitor and the other end to the audio output jack on your input device.
8. Plug the power cord into the power supply brick (1), and then connect the other end of the power cord to an electrical outlet (2). Plug the round end of the power supply cord into the power supply connector on the rear of the monitor (3). WARNING! To reduce the risk of electric shock or damage to the equipment: Plug the power cord into AC outlet that is easily accessible at all times. Disconnect power from the computer by unplugging the power cord from the AC outlet.
Adjusting the monitor To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation, setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. The Safety & Comfort Guide is located on the HP website at http://www.hp.com/ergo. Adjusting the tilt Adjust the tilt to the desired position.
Adjusting the height Adjust the height to a comfortable position.To raise the monitor, hold the top of the monitor with two hands and lift the monitor up. To lower the monitor, hold the top of the monitor with two hands and push the monitor down. The monitor height range is 0 mm to 130 mm.
Front components Component Description 1 Dual microphone array Integrated into the top of the monitor's bezel. 2 Webcam Integrated into the top of the monitor's bezel. 3 Webcam activity LED Indicates that the Webcam is active 4 Menu button Opens, selects from, or exits the OSD menu. 5 Minus/volume button If the OSD menu is on, press to navigate backward through the OSD menu and decrease adjustment levels. If the OSD menu is inactive, press to activate the volume adjustment menu.
Turning on the monitor 1. Press the power button on the source device to turn it on. 2. Press the capacitive power button on the lower right front of the monitor to turn it on. NOTE: When the power button is pressed, the other capacitive button icons light up briefly. CAUTION: Burn-in image damage may occur on monitors that display the same static image onscreen for 12 or more consecutive hours of non-use.
HP watermark and image retention policy The IPS monitor models are designed with IPS (In-Plane Switching) display technology which provides ultra-wide viewing angles and advanced image quality. IPS monitors are suitable for a wide variety of advanced image quality applications. This panel technology, however, is not suitable for applications that exhibit static, stationary or fixed images for long periods of time without the use of screen savers.
18 4. Loosen the two captive screws that secure the stand to the display head. 5. Lift the base up after 45 degrees to disengage the stand (1), and then pull the stand off of the monitor (2).
Mounting the monitor The monitor panel can be attached to a wall, swing arm, or other mounting fixture with a 100 mm x 100 mm mounting pattern. NOTE: 1. This apparatus is intended to be supported by a UL or CSA listed wall mount bracket. Remove the monitor panel from the stand. Refer to Removing the monitor stand on page 17. CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To attach a third-party mounting solution to the monitor, four 4 mm, 0.
Locating the rating label The rating label on the monitor provides the spare part number, product number, and serial number. You may need these numbers when contacting HP about the monitor model. The rating label is located on the rear panel of the monitor behind the cable cover. Installing a cable lock You can secure the monitor to a fixed object with an optional cable lock available from HP.
3 Using the webcam Install CyberLink YouCam software and driver from the disc that came with your monitor. If you do not have an optical disc drive, you may go to http://www.cyberlink.com/prog/support/cs/index.do, select your country, and download the YouCam software. NOTE: USB connectivity between the monitor and PC is required for the webcam to operate. Use your webcam to: ● Create videos from files on your computer. ● Create snapshots to view, organize, edit, send, and print.
Having a video chat or making conference calls To set up a video chat, you must have a connection to the Internet, and ISP, and software that enables you to make video calls over the Internet. As with chat or instant messenger software, you can use this kind of software to chat with one or more people at a time. This software may require a separate subscription. The optimal distance for recording sound with the array microphone is about .5 meters (2 feet) away from the microphone.
4 Using HP MyRoom HP MyRoom is your online meeting room. Connect with business colleagues “face to face” and collaborate with useful tools. Installing HP MyRoom from the disc To install HP MyRoom: 1. Insert the disc that came with your monitor into the computer media drive. 2. Select Install MyRoom and run the setup file. 3. Follow the instructions on the screen. Downloading HP MyRoom from the Internet To download HP MyRoom: 1. Go to https://www.rooms.hp.com/myroom. 2.
5 Using mobile high-definition link (MHL) MHL is used to transmit a mirrored image of an attached smart phone or tablet to the monitor while also recharging the device battery. The smart phone or tablet must be attached using the supplied MHL cable. NOTE: The mobile device must be a certified MHL device. Certified devices are listed at http://www.mhltech.org/productlist/mobile-devices/. 1. Verify that the mobile device is a certified MHL device. 2.
NOTE: The entire screen is dedicated to the MHL device and cannot be shared with any other video source. a. To change the input source to HDMI/MHL if another video connection is active, press and select MHL. b. If no signal or picture appears, turn the monitor off and then on again. Screen resolution and picture scale is determined by the mobile device. Images from some mobile devices, are scaled to fill the screen, but they retain the original aspect ratio.
6 Finding more information Reference guides Refer to the HP LCD Monitors Reference Guide included on the disc with your monitor for additional information on: ● Optimizing monitor performance ● Safety and maintenance guidelines ● Installing software from the disc ● Using the OSD menu ● Downloading software from the Web ● Agency regulatory information ● Troubleshooting and recommended solutions to common problems Product support For additional information on using your monitor, go to http://w
A Technical specifications NOTE: All specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower. HP S240ml Viewable Image Size 60.5-cm diagonal 23.8-inch diagonal Maximum Weight (Unpacked) 6.6 kg 14.55 lbs Height 38.4 cm 15.1 inches Depth 23.9 cm 9.4 inches Width 54.0 cm 21.
Recognizing preset display resolutions The display resolutions listed below are the most commonly used modes and are set as factory defaults. This monitor automatically recognizes these preset modes and they will appear properly sized and centered on the screen. HP S240ml Table A-1 Factory preset modes Preset Pixel format Horz freq (kHz) Vert freq (Hz) 1 640 × 480 31.469 59.940 2 720 × 400 31.469 70.087 3 800 × 600 37.879 60.317 4 1024 × 768 48.363 60.004 5 1280 × 720 45.00 60.
Power adapter Table A-3 Power Adapters/Model Manufacturer Model Number Power Supply Rating TPV ADPC1965 65 W/19 V Entering user modes The video controller signal may occasionally call for a mode that is not preset if: ● You are not using a standard graphics adapter. ● You are not using a preset mode. It this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen display. Your changes can be made to any or all of these modes and saved in memory.
