Operation Manual

Restore original factory defaults and settings

If you disable some functions or change some settings and want to change them back, you can restore the

printer to the original factory settings or network settings.

To restore the printer to the original factory defaults

On the printer control panel display, from the Home screen, touch ( Setup ).

2. Touch Tools , touch Restore Factory Defaults, and then follow the onscreen instructions.

To restore the printer to the original network settings

From the Home screen, touch (Wireless) and then touch ( Settings ).

2. Touch Restore Network Settings, and then follow the onscreen instructions.

3. Print the network conguration page and verify that the network settings have been reset.

NOTE: When you reset the printer network settings, previously congured wireless settings (such as the

link speed or IP address) are removed. The IP address is set back to the Automatic mode.

TIP: You can visit the HP online support website at www.hp.com/support for information and utilities that

can help you correct many common printer problems.

(Windows) Run the HP Print and Scan Doctor to diagnose and automatically x printing, scanning, and copying

issues. The application is only available in some languages.

ENWW Restore original factory defaults and settings 111