Maintenance and Service Guide
Table Of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement procedures
- Preliminary replacement requirements
- Component replacement procedures
- Bottom cover
- Rear cover
- Hard drive
- Memory module
- Y-axis capacitor board
- RTC battery
- USB board
- X-axis capacitor board
- Converter board
- Media card reader board
- USB connector cable
- Speakers
- Display stand recess
- Power button board
- Battery
- Webcam/microphone module
- Audio/USB board
- WLAN module
- Air flow channel
- Display panel cable
- Fan
- System board
- Heat sink
- Display stand
- Wireless antenna
- Middle frame
- Power connector cable
- Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI)
- Specifications
- Backing up, restoring, and recovering
- Power cord set requirements
- Recycling
- Index
Category Description
Wireless Integrated wireless local area network (WLAN) options by way of wireless module
Two WLAN antennas built into display assembly
Supports Intel Smart Connect Technology 4.0
Supports Wireless Display (WiDi/WiFi direct support)
Supports the Broadcom BCM4352 802.11ac 2×2 Wi-Fi + BT 4.0 Combo Adapter
External media cards HP multiformat Digital Media Reader Slot with push-push technology. Reads data from
and writes data to digital memory cards such as Secure Digital (SD).
Power requirements Support for the following AC adapters:
●
65-W HP Smart AC adapter (non-PFC, EM, 4.5-mm)
●
65-W AC adapter (non-PFC S-3P, 4.5-mm)
Support for a 3-cell, 50-Wh, 4.52-Ah, Li-ion battery
Security Intel AT-p Ready support
Intel IPT support
Operating system Preinstalled:
●
Windows 8 ML 64-bit
●
Windows 8 EM/SL 64-bit
Serviceability End user replaceable parts:
●
AC adapter
●
External keyboard
● External mouse
●
External optical drive
●
USB RJ45 adapter
●
Wireless receiver dongle for external keyboard and mouse
2 Chapter 1 Product description