Maintenance and Service Guide
Table Of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement procedures
- Preliminary replacement requirements
- Component replacement procedures
- Bottom cover
- Rear cover
- Hard drive
- Memory module
- Y-axis capacitor board
- RTC battery
- USB board
- X-axis capacitor board
- Converter board
- Media card reader board
- USB connector cable
- Speakers
- Display stand recess
- Power button board
- Battery
- Webcam/microphone module
- Audio/USB board
- WLAN module
- Air flow channel
- Display panel cable
- Fan
- System board
- Heat sink
- Display stand
- Wireless antenna
- Middle frame
- Power connector cable
- Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI)
- Specifications
- Backing up, restoring, and recovering
- Power cord set requirements
- Recycling
- Index
Remove the system board:
1. Disconnect the following cables from the system board:
(1) USB board ribbon cable
(2) Power connector cable
(3) RTC battery cable
(4) Webcam/microphone module cable
(5) Wireless antenna cables
(6) Audio/USB board ribbon cable
2. Disconnect the following cables from the system board:
(1) USB connector cable
(2) X-axis capacitor board cable
(3) Converter board cable
(4) Media card reader board cable
(5) Left speaker/subwoofer cable
(6) Right speaker cable
Component replacement procedures 55