Maintenance and Service Guide

Base enclosure
Description Spare part number
Base enclosure (Black) 702349-001
Rubber feet 702363-001
Before disassembling the keyboard dock, follow these steps:
1. Shut down the keyboard dock. If you are unsure whether the computer is off or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Remove the base enclosure:
1. Turn the computer face down, and then remove the rubber feet (1). The rubber feet are attached
with adhesive, and have alignment pins that fit into the screw holes.
2. Remove the 2 3.0-mm screws located under the front rubber feet (2), and then remove the 2
polished 4.5-mm screws on the front row (3).
3. Remove the 2 remaining 4.5-mm screws under rear rubber feet (4).
28 Chapter 4 Removal and replacement procedures