Maintenance and Service Guide
Table Of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement procedures
- Setup Utility (BIOS) and System Diagnostics
- Specifications
- Backing up, restoring, and recovering
- Power cord set requirements
- Recycling
- Index
5. Remove the ten screws securing the display bezel.
6. Release the bezel's bottom edge (1), release the left and right edges (2), release the top edge
(3), and remove the display bezel (4).
Reverse this procedure to install the display bezel.
Webcam assembly (front)
Description Spare part numbers
Webcam assembly 702358-001
Before removing the webcam assembly:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the display panel (see
Display panel assembly and Battery on page 40).
Component replacement procedures 51