Maintenance and Service Guide
Table Of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement procedures
- Setup Utility (BIOS) and System Diagnostics
- Specifications
- Backing up, restoring, and recovering
- Power cord set requirements
- Recycling
- Index
3. Remove the Phillips PM screw securing the speaker to the system board (3), and then remove
the speakers (4).
Micro SD digital media board
Description Spare part number
Micro SD digital media board 702357-001
Before removing the micro SD digital media reader card, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
58 Chapter 4 Removal and replacement procedures