User Guide
© Copyright 2012 Hewlett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel is a trademark of Intel Corporation in the U.S. and other countries. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice.
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to come into contact with the skin or a soft surface, such as pillows or rugs or clothing, during operation.
iv Safety warning notice
Table of contents 1 Starting right ................................................................................................................................................... 1 Best practices ....................................................................................................................................... 1 Fun things to do .................................................................................................................................... 1 More HP resources ...
One-finger slide ................................................................................................................. 21 Tapping .............................................................................................................................. 21 Scrolling ............................................................................................................................. 22 Pinching/stretching .................................................................................
Configuring HDMI audio settings ...................................................................... 43 Cameras ............................................................................................................................ 43 5 Navigating using the keyboard, touch gestures and pointing devices ................................................... 44 Using the TouchPad ...........................................................................................................................
Updating programs and drivers .......................................................................................................... 62 Cleaning your computer ..................................................................................................................... 62 Cleaning the display, sides, and cover .............................................................................. 63 Cleaning the TouchPad and keyboard ........................................................................
Operating environment ....................................................................................................................... 79 13 Electrostatic Discharge .............................................................................................................................. 80 Index ...................................................................................................................................................................
x
1 Starting right This computer is a powerful tool designed to enhance your work and entertainment. Read this chapter to learn about best practices after setup, fun things to do with your computer, and where to get more HP resources. Best practices To get the most out of your smart investment, after you set up and register the computer, we recommend the following steps: ● Take a minute to browse the printed Windows 8 Basics guide to explore the new Windows® features.
More HP resources You have already used Setup Instructions to turn on the computer and locate this guide. To locate product details, how-to information, and more, use this table. Resource Contents Setup Instructions ● Overview of computer setup and features. Windows 8 Basics guide ● Overview of using and navigating with Windows® 8. HP Support Assistant ● A broad range of how-to information and troubleshooting tips. Safety & Comfort Guide ● Proper workstation setup.
2 Getting to know your computer Tablet edge components Tablet edge components 3
Components (1) Description Power button ● When the computer is off, press the button to turn on the tablet. ● When the computer is on, press the button briefly to initiate Sleep. ● When the computer is in the Sleep state, press the button briefly to exit Sleep. CAUTION: Pressing and holding down the power button will result in the loss of unsaved information.
Components Description (7) Docking port/power connector Connects the tablet to the keyboard dock and connects an AC adapter. (8) Audio-out (headphone) jack/Audio-in (microphone) jack Connects optional powered stereo speakers, headphones, earbuds, a headset, or a television audio cable. WARNING! To reduce the risk of personal injury, adjust the volume before using headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety and Environmental Notices.
Display Component Description (1) WLAN antennas (2)* Send and receive wireless signals. (2) Internal microphones (2) Record audio, automatically filtering out the noise around you and cancelling echoes. (3) Webcam (front) Records video and takes still photographs. Swipe from the right edge of the TouchPad or touch screen to display the charms, tap Search, and then tap the search box. Type c, and then select Camera from the list of applications.
Component Description (8) With HP TouchZone, you can wirelessly connect, communicate and transfer data/info to and from your Near Field Communication (NFC)-compatible devices. Near Field Communication (NFC) antenna *The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antennas and proximity sensors free from obstructions.
Keyboard dock Top Component Description (1) Alignment posts Align and attach the tablet to the keyboard dock. (2) Release latch Releases the tablet. To release the tablet, slide the release latch to the left. (3) Docking connector Connects the tablet to the keyboard dock. TouchPad Component (1) 8 Description TouchPad on/off button Chapter 2 Getting to know your computer Turns the TouchPad off or on when you double-tap the button.
Component Description (2) TouchPad zone Reads your finger gesture to move the pointer or activate items on the screen. (3) Left TouchPad button Functions like the left button of an external mouse. (4) Right TouchPad button Functions like the right button on an external mouse. Lights Component (1) (2) Description Caps lock light Mute light ● White: Caps lock is on. ● Off: Caps lock is off. ● Amber: Computer sound is off. ● Off: Computer sound is on.
Keys Component Description (1) esc key Displays system information when pressed in combination with the fn key. (2) fn Displays system information when pressed in combination with the esc key. (3) Windows logo key Returns you to the Start screen from an open app or the Windows desktop. NOTE: Pressing the Windows logo key again will return you to the previous screen. (4) b key Enables or disables Beats Audio when pressed in combination with the fn key. (5) Action keys Perform common tasks.
Right side Component (1) Description Digital Media Slot Supports the following digital card formats: ● Secure Digital (SD) Memory Card ● Secure Digital Extended Capacity (SDxC) Memory Card ● Secure Digital High Capacity (SDHC) Memory Card ● Ultra High Speed MultiMediaCard (UHS/MMC) (2) USB 2.0 port Connects an optional USB device. (3) Power connector Connects an AC adapter.
Left side Component Description (1) HDMI port Connects an optional video or audio device, such as a highdefinition television, any compatible digital or audio component, or a high-speed HDMI device. (2) USB 2.0 port Connects an optional USB device. (3) Audio-out (headphone) jack/Audio-in (microphone) jack Connects optional powered stereo speakers, headphones, earbuds, a headset, or a television audio cable. Also connects an optional headset microphone.
Releasing the tablet from the keyboard dock To release the tablet from the keyboard dock, follow these steps: 1. Slide the release latch on the keyboard dock to the left (1). 2. Lift and remove the tablet (2).
Locating system information Important system information is located on the bottom edge of the tablet.
Changing your tablet's settings You can change view and screen brightness. Changing your tablet's view Your tablet's orientation, or view, changes automatically from landscape to portrait view, or from portrait to landscape view. 1. To change the view of your tablet from landscape view to portrait view: Hold the tablet vertically, and then turn it 90 degrees to the right (in a clockwise direction). 2.
Using TouchPad gestures NOTE: TouchPad gestures are not supported in all apps. Tapping To make an on-screen selection, use the Tap function on the TouchPad. ● Point to an item on the screen, and then tap one finger on the TouchPad zone to make a selection. Double-tap an item to open it. NOTE: Press and hold on the TouchPad to open a help screen that provides information about the selected item. Scrolling Scrolling is useful for moving up, down, or sideways on a page or image.
Pinching/zooming Pinching and zooming allow you to zoom out or in on images or text. ● Zoom in by placing two fingers together on the TouchPad zone and then moving your fingers apart. ● Zoom out by placing two fingers apart on the TouchPad zone and then moving your fingers together.
Rotating (select models only) Rotating allows you to turn items such as photos. ● Point to an object, then anchor the forefinger of your left hand in the TouchPad zone. Using your right hand, slide your forefinger in a sweeping motion from 12 o’clock to 3 o’clock. To reverse the rotation, move your forefinger from 3 o’clock to 12 o’clock. NOTE: Rotate is intended for specific apps where you can manipulate an object or image. It may not be functional for all apps.
Right-edge swipe The right-edge swipe accesses the charms, which let you search, share, start apps, access devices, or change settings. ● Swipe your finger gently from the right edge to display the charms. Top-edge swipe The top-edge swipe allows you to open apps available on the Start screen. IMPORTANT: ● When an app is active, the top-edge gesture varies depending on the app. Swipe your finger gently from the top edge to display available apps.
Left-edge swipe The left-edge swipe accesses your recently opened apps so that you can switch between them quickly. ● 20 Swipe your finger gently from the left edge of the TouchPad to switch between recently opened apps.
Using touch screen gestures A touch screen computer allows you to control items on the screen directly with your fingers. TIP: On touch screen computers, you can perform the gestures on the screen or on the TouchPad. You can also perform on-screen actions with the keyboard and mouse. One-finger slide The one-finger slide is mostly used to pan or scroll through lists and pages, but you can use it for other interactions, too, such as moving an object.
Scrolling Scrolling is useful for moving the pointer up, down, left, or right on a page or image. ● Place two fingers on the screen and then drag them in an up, down, left, or right motion. Pinching/stretching Pinching and stretching allows you to zoom out or in on images or text. 22 ● Zoom in by placing two fingers together on the display and then move your fingers apart. ● Zoom out by placing two fingers apart on the display and then move your fingers together.
Rotating (select models only) Rotating allows you to turn items such as photos. ● Anchor the forefinger of your left hand on the object you want to rotate. Using your right hand, slide your forefinger around in a sweeping motion from 12 o’clock to 3 o’clock. To reverse the rotation, move your forefinger from 3 o’clock to 12 o’clock. NOTE: Rotate is intended for specific apps where you can manipulate an object or image. Rotate may not be functional for all apps.
Left-edge swipe The left-edge swipe accesses your recently opened apps so that you can switch between them quickly. 24 ● Gently swipe your finger inward from the left edge of the display bezel to switch between recently-opened apps. ● Without lifting your finger, swipe back toward the left edge to display all recently opened apps.
Top-edge swipe and bottom-edge swipe The top-edge swipe or bottom-edge swipe allows you to open a list of apps available on your computer. 1. Gently swipe finger from the top edge or the bottom edge of the display bezel onto the screen. 2. Tap All apps to view available apps.
Setting touch screen preferences Mode Steps 1. Swipe from the right edge of the TouchPad or touch screen to display the charms, tap Search, and then tap the search box. 2. Type c, tap Control Panel, tap Hardware and Sound, tap Pen and Touch, and then follow the on-screen instructions. To change or create flick assignments: 1. On the Start screen, type c, and then tap Control Panel. 2. Tap Hardware and Sound, tap Pen and Touch, and then tap the Flicks tab. 3.
Using the on-screen keyboard You may want to enter data into a data field. This may be required when you set up a wireless network configuration or a weather reporting location, or when you access user accounts on Internet sites. The computer has an on-screen keyboard that is displayed when you need to enter such information into data fields. 1. To display the keyboard, tap in the first data field. Tap the small keyboard icon that is displayed.
Using the digital pen (select models only) To insert the battery in the pen: 1. Unscrew the cap from the pen. 2. Insert the battery in the pen. 3. Replace the cap on the pen. 4. Turn the cap in a clockwise direction to tighten it. The digital pen is now ready to use with your HP computer. Simply touch the tip of the pen lightly on the screen to write text or items on the screen. To perform a right-action click, press the button on the side of the pen when selecting an item on the screen.
Finding your hardware and software information Locating hardware To find out what hardware is installed on your computer: 1. From the Start screen, type c, and then select Control Panel. 2. Select System and Security, and then in the System area, click Device Manager. A list displays all the devices installed in your computer.
3 Connecting to a network Your computer can travel with you wherever you go. But even at home, you can explore the globe and access information from millions of websites using your computer and a wired or wireless network connection. This chapter will help you get connected to that world. Connecting to a wireless network Wireless technology transfers data across radio waves instead of wires.
Using operating system controls The Network and Sharing Center allows you to set up a connection or network, connect to a network, manage wireless networks, and diagnose and repair network problems. To use operating system controls: Mode Steps 1. Swipe from the right edge of the TouchPad or touch screen to display the charms, tap Search, and then tap the search box. 2. Type network and sharing in the search box, and then select Network and Sharing Center. 1.
Setting up a WLAN To set up a WLAN and connect to the Internet, you need the following equipment: ● A broadband modem (either DSL or cable) (1) and high-speed Internet service purchased from an Internet service provider ● A wireless router (2) (purchased separately) ● A wireless computer (3) NOTE: Some modems have a built-in wireless router. Check with your ISP to determine what type of modem you have.
Wireless encryption uses security settings to encrypt and decrypt data that is transmitted over the network. For more information, access HP Support Assistant. To access HP Support Assistant, on the Start screen, select the HP Support Assistant app Connecting to a WLAN To connect to the WLAN, follow these steps: 1. Be sure that the WLAN device is on. 2. From the Windows desktop, tap or click the network status icon in the notification area, at the far right of the taskbar. 3.
4 Enjoying entertainment features Use your HP computer as an entertainment hub to socialize via the webcam, enjoy and manage your music, and download and watch movies. Or, to make your computer an even more powerful entertainment center, connect external devices like a monitor, projector, or TV, or speakers and headphones.
Multimedia features Here are some of the entertainment features on your computer. Component Description (1) Camera light (rear) Provides flash lighting for the camera. (2) Webcam (rear) Records video, captures still photographs, and allows video conferences and online chat by means of streaming video. To use the webcam, type c, and then select Camera. (3) (4) Volume button Audio-out (headphone) jack/Audio-in (microphone) jack Controls speaker volume.
Component Description (1) Internal microphones (2) Record sound. (2) Webcam (front) Records video, captures still photographs, allows you to video conference and chat online using streaming video. Swipe from the right edge of the TouchPad or touch screen to display the charms, tap Search, and then tap the search box. type c, and then select Camera from the list of applications. – or – From the Start screen, type c, and then select Camera from the list of applications.
Component Description (7) b key Enables or disables Beats Audio when pressed in combination with the fn key. Beats Audio is an enhanced audio feature that provides a deep, controlled bass while maintaining a clear sound. Beats Audio is enabled by default. You can also view and control the bass settings through the Windows operating system. To view and control the bass properties, open the Beats Audio Control Panel.
Using the webcams The computer has two integrated webcams, which are powerful social networking tools that allow you to communicate up close with friends and colleagues, next door or on the other side of the world. With the webcams, you can stream video with your instant messaging software, capture and share video, and take still photos. To start the webcams, Mode Steps 1. Swipe from the right edge of the TouchPad or touch screen to display the charms, tap Search, and then tap the search box. 2.
Using audio On your HP computer, you can download and listen to music, stream audio content from the web (including radio), record audio, or mix audio and video to create multimedia. To enhance your listening enjoyment, attach external audio devices such as speakers or headphones.
Connecting speakers You can attach wired speakers to your computer by connecting them to a USB port (or the audio-out jack) on your computer or on a docking station. To connect wireless speakers to your computer, follow the device manufacturer's instructions. To connect high-definition speakers to the computer, see Configuring HDMI audio settings on page 43. Before connecting audio devices, be sure to adjust the volume.
Mode Steps 1. Swipe from the right edge of the TouchPad or touch screen to display the charms, tap Search, and then tap the search box. 2. Type c, tap Control Panel, tap Hardware and Sound, and then tap Sound. 3. When the Sound window opens, tap the Sounds tab. Under Program Events, tap any sound event, such as a beep or alarm, and then tap Test. 1. On the Start screen, type c, and then select Control Panel from the list of applications. 2. Select Hardware and Sound, and then select Sound. 3.
Using video Your HP computer is a powerful video device that enables you to watch streaming video from your favorite websites and download video and movies to watch on your computer without needing to connect to a network. To enhance your viewing enjoyment, use one of the video ports on the keyboard dock to connect an external monitor, projector, or TV. Your computer has an high-definition multimedia interface (HDMI) port, which allows you to connect a high-definition monitor or TV.
NOTE: Adjust the screen resolution of the external device, especially if you choose the “Extend” option. From the Start screen on the keyboard dock, type c, and then select Control Panel from the list of applications. Select Appearance and Personalization. Under Display, select Adjust screen resolution for best results. Configuring HDMI audio settings HDMI is the only video interface that supports high-definition video and audio.
5 Navigating using the keyboard, touch gestures and pointing devices Your computer allows navigation using touch gestures in addition to the keyboard and mouse. Touch gestures can be used on your computer's TouchPad or on a touch screen. NOTE: An external USB mouse (purchased separately) can be connected to one of the USB ports on the keyboard dock. Review the Windows 8 Basics guide included with your computer.
Using the TouchPad The TouchPad allows you to navigate the computer with simple finger movements. You can customize the touch gestures by changing settings, button configurations, click speed, and pointer options. From the Start screen, type c to display the Apps list. Select Control Panel, and then select Hardware and Sound. Under Devices and Printers, select Mouse. Turning the TouchPad off or on To turn the TouchPad off or on, double-tap the TouchPad on/off button.
Using the keyboard and mouse The keyboard and mouse allow you to type, select items, scroll and perform the same functions as using touch gestures. The keyboard dock allows you to use special action keys and hot keys to perform specific functions. NOTE: Action keys do not display or function on the on-screen keyboard of the tablet. TIP: The Windows logo key on the keyboard allows you to quickly return to the Start screen from an open app or the Windows desktop.
Icon Key Description f4 Switches the screen image between display devices connected to the system. For example, if a monitor is connected to the computer, pressing this key alternates the screen image from the computer display to the monitor display to a simultaneous display on both the computer and the monitor. This action key can also alternate images among other devices that are receiving video information from the computer.
Shortcut key + Key Description tab Switches between open apps. NOTE: Continue to press this key combination until the app you want opens. alt + o Turns the autorotate lock feature off or on. + f4 Closes an active app. NOTE: Action keys do not display or function on the on-screen keyboard of the tablet. Using the hot keys A hot key is a combination of the fn key and either the esc key or the b key.
6 Managing power Your computer can operate on either battery power or external power. When the computer is only running on battery power and an AC power source is not available to charge the battery, it is important to monitor and conserve the battery charge. Your computer supports power plans to manage how your computer uses and conserves power so that you can balance computer performance with power conservation.
Initiating Sleep and Hibernation Microsoft® Windows has two power-saving states, Sleep and Hibernation. ● Sleep–The Sleep state is automatically initiated after a period of inactivity when running on battery power or on external power. Your work is saved to memory, allowing you to resume your work very quickly. You can also initiate Sleep manually. For more information, see Initiating and exiting Sleep on page 50.
Enabling and exiting user-initiated Hibernation You can enable user-initiated Hibernation and change other power settings and timeouts using Power Options: 1. From the Start screen, type power, select Settings, and then select Power Options from the list of applications. 2. In the left pane, click Choose what the power button does. 3. Click Change Settings that are currently unavailable. 4. In the When I press the power button area, select Hibernate. 5. Click Save changes.
Setting password protection on wakeup To set the computer to prompt for a password when the computer exits Sleep or Hibernation, follow these steps: 1. From the Start screen, type power, select Settings, and then select Power Options from the list of applications. 2. In the left pane, click Require a password on wakeup. 3. Click Change Settings that are currently unavailable. 4. Click Require a password (recommended).
Using the power meter and power settings The power meter is located on the Windows desktop. The power meter allows you to quickly access power settings and view the remaining battery charge. ● To display the percentage of remaining battery charge and the current power plan, on the Windows desktop, point over the power meter icon. ● To use Power Options, or to change the power plan, click the power meter icon and select an item from the list.
Selecting a power plan A power plan manages how the computer uses power and helps you conserve power and maximize performance. To change the power plan, from the Start screen, type power, select Settings, and then select Power Options from the list of applications. The following power plans are available: ● HP Recommended (recommended). Automatically balances performance with energy consumption on capable hardware. ● Power saver.
To access battery information, select HP Support Assistant from the Start screen, and then select Battery and performance. Conserving battery power Tips for conserving battery power and maximizing battery life: ● Lower the brightness on the display. ● Select the Power saver setting in Power Options. ● Turn off wireless when you are not using them. ● Disconnect unused external devices that are not plugged into an external power source, such as an external hard drive connected to a USB port.
Resolving a low battery level when the computer cannot exit Hibernation When the computer lacks sufficient power to exit Hibernation, follow these steps: 56 1. Connect the AC adapter to the computer and to external power. 2. Exit Hibernation by pressing the power button.
Running on external AC power For information on connecting to AC power, refer to the Setup Instructions poster provided in the computer box. The computer does not use battery power when the computer is connected to AC external power with an approved AC adapter or an optional docking/expansion device.
Shutting down (turning off) the computer CAUTION: Unsaved information is lost when the computer shuts down. Be sure to save your work before shutting down the computer. The Shut down command closes all open programs, including the operating system, and then turns off the display and computer.
7 Managing and sharing information Drives are digital storage devices that help you store, manage, share, and access information. Your computer has a solid state drive that stores your computer's software, operating system, and also provides storage for all of your personal files. For added capacity or functionality, connect an external drive (purchased separately), such as an optical drive or hard drive, or insert a digital storage card directly from your phone or camera.
▲ Connect the USB cable for the device to the USB port. NOTE: The USB port on your computer may look slightly different from the illustration in this section. A sound indicates that the device has been detected. NOTE: The first time you connect a USB device, a message displays on the Windows desktop and an icon appears in the notification area, letting you know that the device is recognized by the computer.
Inserting and removing a digital storage card To insert a digital storage card: CAUTION: To reduce the risk of damage to the digital card connectors, use minimal force to insert a digital card. 1. Hold the card label-side up, with the connectors facing the computer. 2. Insert the card into the digital storage slot, and then press in on the card until it is firmly seated. A sound indicates that the device has been detected.
8 Maintaining your computer It is important to perform regular maintenance to keep your computer in optimal condition. This chapter provides information about improving the performance of your computer by running tools such as Disk Defragmenter and Disk Cleanup. It also provides information about updating your programs and drivers, instructions for cleaning your computer, and tips for traveling with your computer.
CAUTION: Avoid using the following cleaning products to clean your computer: Strong solvents, such as alcohol, acetone, ammonium chloride, methylene chloride, and hydrocarbons, which can permanently damage the surface of the computer. Cleaning the display, sides, and cover Gently wipe the display using a soft, lint-free cloth moistened with an alcohol-free glass cleaner. Allow the display to dry before closing the computer cover. Use a pre-moistened germicidal wipe to clean the sides and cover.
CAUTION: Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport walk-through devices and security wands. Airport conveyer belts and similar security devices that check carry-on baggage use X-rays instead of magnetism and do not damage drives. ● If you plan to use the computer during a flight, listen for the in-flight announcement that tells you when you are allowed to use your computer. In-flight computer use is at the discretion of the airline.
9 Securing your computer and information Tablet security is essential for protecting the confidentiality, integrity, and availability of your information. Standard security solutions provided by the Windows operating system, HP applications, the non-Windows Setup Utility (BIOS), and other third-party software can help protect your computer from a variety of risks, such as viruses, worms, and other types of malicious code.
● An ideal password is long and has letters, punctuation, symbols, and numbers. ● Before you send your computer for service, back up your files, delete confidential files, and then remove all password settings. For additional information about Windows passwords, such as screen-saver passwords, from the Start screen, access HP Support Assistant.
To set, change, or delete an administrator or power-on password in Setup Utility (BIOS): 1. Open Setup Utility (BIOS) by turning on or restarting the computer. While the “Press the ESC key for Startup Menu” message is displayed in the lower-left corner of the screen, press esc. 2. Use the arrow keys and follow the on-screen instructions. When the Startup Menu is displayed, press f10. 3. Use the arrow keys to select Security, and then follow the on-screen instructions.
security breaches and viruses, install all critical updates from Microsoft as soon as you receive an alert. To be sure that all available updates are installed on the computer, observe these guidelines: ● Run Windows Update as soon as possible after you set up your computer. From the Start screen, type u, select Settings, and then select Windows Update. ● Run Windows Update monthly thereafter.
10 Using Setup Utility (BIOS) and System Diagnostics Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup Utility (BIOS) includes settings for the types of devices installed, the startup sequence of the computer, and the amount of system and extended memory.
Downloading a BIOS update CAUTION: To reduce the risk of damage to the computer or an unsuccessful installation, download and install a BIOS update only when the computer is connected to reliable external power using the AC adapter. Do not download or install a BIOS update while the computer is running on battery power or connected to an optional power source.
Using System Diagnostics System Diagnostics allows you to run diagnostic tests to determine if the computer hardware is functioning properly. To start System Diagnostics: 1. Turn on or restart the computer, quickly press esc, and then press f2. 2. Click the diagnostic test you want to run, and then follow the on-screen instructions. NOTE: If you need to stop a diagnostic test while it is running, press esc.
11 Backing up, restoring, and recovering Your computer includes tools provided by HP and the operating system to help you safeguard your information and retrieve it if you ever need to. These tools will help you return your computer to a proper working state or even back to the original factory state, all with simple steps.
Creating recovery media and backups Recovery after a system failure is only as good as your most recent backup. 1. As you add hardware and software programs, create system restore points. A system restore point is a snapshot of certain hard drive contents saved by Windows System Restore at a specific time. A system restore point contains information that Windows uses, such as registry settings.
Restore and recovery There are several options for recovering your system. Choose the method that best matches your situation and level of expertise: If you need to restore your personal files and data, you can use Windows File History to restore your information from the backups you created. For more information and steps for using File History, access HP Support Assistant. To access HP Support Assistant, on the Start screen, select the HP Support Assistant app.
Using Windows Refresh for quick and easy recovery When your computer is not working properly and you need to regain system stability, the Windows Refresh option allows you to start fresh and keep what is important to you. IMPORTANT: Refresh removes any traditional applications that were not originally installed on the system at the factory. NOTE: During Refresh, a list of removed traditional applications will be saved so that you have a quick way to see what you might need to reinstall.
3. Click Change PC settings in the bottom-right corner of the screen, and then select General from the PC settings screen. 4. Under Remove everything and reinstall Windows, select Get started, and follow the onscreen instructions. Recovering using HP Recovery Manager HP Recovery Manager software allows you to recover the computer to its original factory state.
To start HP Recovery Manager from the HP Recovery partition: 1. Press f11 while the computer boots. – or – Press and hold f11 as you press the power button. 2. Select Troubleshoot from the boot options menu. 3. Select HP Recovery Manager, and follow the on-screen instructions. Changing the boot order If the computer does not restart in HP Recovery Manager, you can change the computer boot order, which is the order of devices listed in BIOS where the computer looks for startup information.
12 Specifications Input power The power information in this section may be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100–240 V, 50–60 Hz. Although the computer can be powered from a standalone DC power source, it should be powered only with an AC adapter or a DC power source supplied and approved by HP for use with this computer.
Operating environment Factor Metric U.S.
13 Electrostatic Discharge Electrostatic discharge is the release of static electricity when two objects come into contact—for example, the shock you receive when you walk across the carpet and touch a metal door knob. A discharge of static electricity from fingers or other electrostatic conductors may damage electronic components.
Index Symbols/Numerics (webcam front), identifying 6 A action keys decrease screen brightness 46 Help and Support 46 identifying 10 increase screen brightness 46 next track or section 47 play, pause, resume 47 previous track or section 47 switch screen image 47 volume down 47 volume mute 47 volume up 47 antivirus software, using 67 audio functions, checking 40 audio-out (headphone) jacks 5, 12, 35 B back up personal files 73 backing up software and information 68 backups 72 bass settings hot key 48 batte
HP Recovery partition recovery 76 removing 77 hubs 59 77 mute light, identifying I input power 78 installing critical updates 67 integrated front webcam, identifying 36 integrated rear webcam, identifying 4, 6, 35 internal microphone, identifying 36 internal microphones, identifying 6 Internet connection setup 32 Internet security software, using 67 J jacks audio-out (headphone) 5, 12, 35 K keyboard hot keys, identifying keys action 10 esc 10 Windows logo 10 L labels serial number 14 left-edge swipe 24 l
USB devices connecting 59 description 59 removing 60 USB hubs 59 using external AC power 57 using passwords 65 V video 42 W warranty period 14 webcam 38 webcam (front), identifying 36 webcam light, identifying 6, 36 Windows backup 73 File History 73 Refresh 74, 75 reinstall 74, 75 remove everything and reinstall option 75 reset 75 system restore point 73, 74 Windows logo key, identifying 10 Windows passwords 66 Windows updates, installing 67 wireless certification information 14 wireless controls operating
