HP Compaq dx 7200 and dc7600 Personal Computers, Technical Reference Guide, 1st Edition

7-10 www.hp.com Technical Reference Guide

Power and Signal Distribution

Figure 7-4 shows the power supply cabling for the microtower systems.

NOTES:

Connectors not shown to scale.

All + and - values are VDC.

RTN = Return (signal ground)

GND = Power ground

RS = Remote sense

POK = Power ok (power good)

FC = Fan Command

[1] This row represents pins 13–24 of connector P1.

Figure 7-4. MT Power Cable Diagram

Conn Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9

P1 +3.3 +3.3 RTN +5 RTN +5 RTN POK 5 aux +12 +12 +3.3

P1 [1] +3.3 -12 RTN PS On RTN RTN RTN Open +5 +5 +5 RTN

P3 RTN RTN VccP VccP

P4, 5,

9, 10

+3.3 RTN +5.08 RTN +12

P6, 7,

+12 RTN RTN +5

P8 +5 RTN RTN +12

Power Supply

385576

P9, P10

123

P2-P6

P9 P10