HP StorageWorks ESL9000 Series Pass-Through Mechanism (PTM) Installation Guide (February 2005)

Installing a PTM
40 HP StorageWorks ESL9000 Series Pass-Through Mechanism (PTM) Installation Guide
Reinstalling the tape cartridge bins
Once the PTM assembly is centered, tighten the 10-32 screws to 30 +/- 3 in/lb. If
necessary, reinstall the tape cartridge bins that were previously removed.
■ For PTM assemblies installed on the left side of an ESL9198 library, see
Figure 10 on
page 33.
■ For PTM assemblies installed on the left side of an ESL9322 library, see
Figure 11 on
page 34.
Note: You do not need to reinstall tape cartridge bins for PTM assemblies that were
installed on the right side of ESL9198 and ESL9322 libraries.