HP StorageWorks ESL9000 Series Pass-Through Mechanism (PTM) Installation Guide (February 2005)

Installing a PTM

44 HP StorageWorks ESL9000 Series Pass-Through Mechanism (PTM) Installation Guide

Table 6: ESL9326 and ESL9595 tape cartridge bin removal

Library orientation Tape cartridge bins to remove

ESL9326 library in right-most position with PTM

installed on left side of another library:

■ Remove the four 8-cartridge bin shelf

modules from the interior wall of the library

as shown. (Also see Figure 19 on page 47.)

Note: These bins are reinstalled later in the

procedure.

■ When installing the PTM, you may need to

temporarily remove two more bins to allow

the PTM to be positioned.

ESL9326 library in the left-most position with

PTM connected to another library on the right:

■ Remove the four 8-cartridge tape cartridge

bin from the interior wall of the library as

shown. (Also see Figure 19 on page 47.)

Note: These bins are reinstalled later in the

procedure.

Tape cartridge bins