HP StorageWorks ESL9000 Series Pass-Through Mechanism (PTM) Installation Guide (February 2005)

Installing a PTM

45HP StorageWorks ESL9000 Series Pass-Through Mechanism (PTM) Installation Guide

ESL9595 (400/500/595 bin) library in

right-most position with PTM installed on left side

of another library:

■ Remove the four bin shelf modules from the

interior wall of the library as shown. (Also

see Figure 19 on page 47.)

■ When installing the PTM, you may need to

temporarily remove two more bins to allow

the PTM to be positioned.

ESL9595 (400/500/595 bin) library in the

right-most position with PTM installed on

another library on the left:

■ Remove the four 10-cartridge bin shelf

modules from the interior wall of the library

as shown. (Also see Figure 20 on page 48.)

ESL9595 (400/500/595 bin) library in the

left-most position with PTM connected to another

library on the right:

■ Remove the single 6-cartridge tape

cartridge bin from the interior wall of the

library as shown. (Also see Figure 20 on

page 48.)

Table 6: ESL9326 and ESL9595 tape cartridge bin removal (Continued)

Library orientation Tape cartridge bins to remove

Tape cartridge bins