HP StorageWorks ESL9000 Series Pass-Through Mechanism (PTM) Installation Guide (February 2005)

Installing a PTM
51HP StorageWorks ESL9000 Series Pass-Through Mechanism (PTM) Installation Guide
4. Holding the PTM right side up, slide it through the right library pass through
cut-out and into the left library (see Figure 23).
Note: Make sure that the PTM cable is routed behind the PTM assembly.
Figure 23: PTM installation (ESL9326 shown)
5. Slide the PTM mounting tabs onto the screws previously installed in step 3.
6. Install the two 10-32 x 5/8 screws with #10 washers on the bottom mounting
tabs of the PTM, one in each library (see Figure 23).
Bottom mounting tab
PTM
Bottom mounting tab