HP StorageWorks ESL9000 Series Pass-Through Mechanism (PTM) Installation Guide (February 2005)

Installing a PTM
53HP StorageWorks ESL9000 Series Pass-Through Mechanism (PTM) Installation Guide
Installing the PTM cable cover
To install the PTM cable cover:
1. Attach the pass through cable cover (6312061) with four 10-32 x 5/8 screws
and washers to the bin wall to cover the cable and cable hole (see Figure 25).
Tighten screws to 30 +
3 in lb.
Figure 25: PTM installation (ESL9326 shown)
Screws
PTM cable cover
Screw