HP StorageWorks ESL9000 Series Pass-Through Mechanism (PTM) Installation Guide (February 2005)

Installing a PTM
57HP StorageWorks ESL9000 Series Pass-Through Mechanism (PTM) Installation Guide
3. Slide the mounting clips into the holes and push down to secure the tape
cartridge bin.
4. Place a nylon snap rivet into the hole near the middle of the tape cartridge bin
so that it also goes through the matching hole in the back wall of the library,
ensuring that the center plunger of the rivet remains extended.
5. Lock the snap rivet in place by pushing the center plunger of the snap rivet in
until it contacts the surface of the tape cartridge bin.
6. Repeat these steps to install the remaining bin shelf modules.