HP StorageWorks ESL9000 Series Pass-Through Mechanism (PTM) Installation Guide (February 2005)

Installing a PTM
65HP StorageWorks ESL9000 Series Pass-Through Mechanism (PTM) Installation Guide
2. Locate the QSPI connectors at the bottom of the PCI chassis (see Figure 35).
Figure 35: PTM connector locations
3. Install a QSPI terminator on the left QSPI connector 1 for the left-most
library.
4. Connect one end of the interconnect cable to the right QSPI connector
2 on
the left-most library.
5. Route the interconnect cable through the bottom of the library and then
connect it to the left QSPI connector on the right-most library.
1 Left QSPI connector
2 Right QSPI connector
3 SCSI bulkhead
DIAG.
D
E
F
G
DRIVE POSITION
H
I
J
B
C
CONT.
L
K
PTM
A
1
2
3
4
5
6
7
9
0
8
EXPANSION
DRIVES
2
1
3
SHR-1803
1
2
SHR-1947