HP StorageWorks ESL9000 Series Pass-Through Mechanism (PTM) Installation Guide (February 2005)

Configuring and Calibrating a PTM
72 HP StorageWorks ESL9000 Series Pass-Through Mechanism (PTM) Installation Guide
Configuring a PTM using the control panel
To configure a PTM from the control panel:
Caution: This procedure must be done using the control panel or diagnostic
software any time a PTM is added or removed from a multi-unit library system.
1. From the Operator tab, select Configure Library.
2. Go to the PTM field on the screen and set it to None, Left, Right, or Both.