HP StorageWorks ESL9000 Series Pass-Through Mechanism (PTM) Installation Guide (February 2005)

Configuring and Calibrating a PTM
75HP StorageWorks ESL9000 Series Pass-Through Mechanism (PTM) Installation Guide
Calibrating the PTM using the control panel
To calibrate the PTM using the control panel on the Master Library.
1. From the Multi Unit tab, touch the Calibrate all PTMs button. All of the
PTMs in all of the libraries are now automatically calibrated.
2. Once calibrated, place each library On-Line starting with the slave units from
right to left. Bring the master unit On-Line last. When the master library
comes on-line, it issues a MODE SENSE command and retrieves
configuration information from the slave libraries. When complete, all
libraries read on-line from the control panel.