HP StorageWorks Interface Manager and Command View TL Installation Guide (March 2005)
Table Of Contents
- Title
- Contents
- About this Guide
- 1: Introduction
- 2: Hardware Installation
- Preparing the Installation
- Installing the Expansion Cage in the ESL Series Library
- Installing the Fibre Channel Interface Controllers into the Expansion Cage
- Installing the Interface Manager Card into the Expansion Cage
- Connecting the Cables
- Connecting the Interface Manager Card to the Fibre Channel Interface Controllers
- Connecting the SCSI Bus Cables
- Connecting the Fibre Channel Cables
- Connecting the Interface Manager Card to the LAN
- Connecting the PC or Laptop
- Completing the Hardware Installation
- 3: Configuration and Software Installation
- 4: Troubleshooting
- A: Serial and Ethernet Pin Assignments
- B: Regulatory Compliance Notice
- Federal Communications Commissions Notice
- Harmonics Conformance (Japan)
- German Noise Declaration
- C: Electrostatic Discharge
- D: Specifications
- Index
Hardware Installation
20 Interface Manager and Command View TL Installation Guide
Preparing the Installation
■ Required components and hardware:
— ESL9000 Series library (with minimum firmware revision of 3.40)
— ESL9000 Series library expansion cage with cooling fan (first-time
installations only)
— Interface Manager card
— FC interface controllers (up to four per library)
— Ethernet cable bundle—included with the Interface Manager card
— RJ-45 Ethernet cable
— Serial cable—included with the Interface Manager card
— SCSI and Fibre Channel cables (as needed)
— Screwdrivers (Phillips and flathead)
— Allen wrench
— Multimeter
— Anti-static wrist strap
— Management station—a Microsoft Windows-based PC (server)
— Additional PC or laptop (optional)
— IP address, subnet mask, and gateway address for Interface Manager card
(from Network Administrator)
■ Documentation
— HP StorageWorks Interface Manager and Command View TL Installation
Guide (this guide)
— HP StorageWorks Interface Manager and Command View TL Installation
Instructions (optional)
— Review all safety warnings, cautions, and prerequisites for the ESL9000
Series library, Interface Manager card, and FC interface controllers.
Caution: Parts can be damaged by electrostatic discharge. Keep parts in their
containers until needed. Make sure that you are properly grounded when
touching static-sensitive components.