HP StorageWorks Interface Manager and Command View TL Installation Guide (March 2005)
Table Of Contents
- Title
- Contents
- About this Guide
- 1: Introduction
- 2: Hardware Installation
- Preparing the Installation
- Installing the Expansion Cage in the ESL Series Library
- Installing the Fibre Channel Interface Controllers into the Expansion Cage
- Installing the Interface Manager Card into the Expansion Cage
- Connecting the Cables
- Connecting the Interface Manager Card to the Fibre Channel Interface Controllers
- Connecting the SCSI Bus Cables
- Connecting the Fibre Channel Cables
- Connecting the Interface Manager Card to the LAN
- Connecting the PC or Laptop
- Completing the Hardware Installation
- 3: Configuration and Software Installation
- 4: Troubleshooting
- A: Serial and Ethernet Pin Assignments
- B: Regulatory Compliance Notice
- Federal Communications Commissions Notice
- Harmonics Conformance (Japan)
- German Noise Declaration
- C: Electrostatic Discharge
- D: Specifications
- Index
69Interface Manager and Command View TL Installation Guide
A
Serial and Ethernet Pin
Assignments
Table 8: RJ-45 network port pinout
Key Pin Description
1 Transmit out +
2 Transmit out -
3Receive in +
4 No connection
5 No connection
6Receive in -
7 No connection
8 No connection
Table 9: RJ-45 FC interface controller and cascade port pinouts
Key Pin Description
1Receive in +
2Receive in -
3 Transmit out +
4 No connection
5 No connection
6 Transmit out -
7 No connection
8 No connection