EtherExpressTM PRO/10+ ISA PCLA8205B Installation Guide
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
1 Connecting to a Netware 3.12 Server Windows for Workgroups Version 3.11 1 Connecting to a Netware 3.12 Server Windows for Workgroups Version 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress ISA 10MBS Ethernet adapter card and drivers disk Ver. 2.3. • Driver Name: EPRO.386 Size: 16KB Date: 10/22/96 • Novell Netware 3.12 server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
1 Connecting to a Netware 3.12 Server Windows for Workgroups Version 3.11 7 Remove the Intel drivers diskette and reboot the machine, and boot to a DOS prompt. 8 Insert Netware Client for DOS and Windows Disk 1 and execute “A:\INSTALL.” 9 Change the settings to match the following and then option 6 to continue the installation.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • Intel EtherExpress PRO ISA ethernet card and drivers disk Ver. 2.3. • Driver Name: El90X.DOS Size: 45KB Date: 3/21/97 • Novell Netware 3.12 server that supports Net BEUI,TCP/IP, NWLink IPX/ SPX, and NWLink NetBIOS transfer protocols.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 10 Click “OK” to the “Network” dialog box to provide computer / work group names. 11 Specify your Computer Name, Workgroup, and Computer Description. (If you do not have the required information, contact your network administrator) 12 Click on “Close” button, and files will copy. 13 Click on the “Yes” button to finish the installation and restart your computer.
2 Connecting to a Netware 4.11 Server Windows for Workgroups Version 3.11 2 Connecting to a Netware 4.11 Server Windows for Workgroups Version 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress ISA 10MBS Ethernet adapter card and drivers disk Ver. 2.3. • Driver Name: EPRO.386 Size: 16KB Date: 10/22/96 • Novell Netware 4.11 server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
2 Connecting to a Netware 4.11 Server Windows for Workgroups Version 3.11 7 Remove the Intel drivers diskette and reboot the machine, and boot to a DOS prompt. 8 Insert Netware Client for DOS and Windows Disk 1 and execute “A:\INSTALL.” 9 Change the settings to match the following and then option 6 to continue the installation.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • Intel EtherExpress PRO ISA ethernet card and drivers disk Ver. 2.3. • Driver Name: El90X.DOS Size: 45KB Date: 3/21/97 • Novell Netware 4.11 server that supports Net BEUI,TCP/IP, NWLink IPX/ SPX, and NWLink NetBIOS transfer protocols.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 10 Click “OK” to the “Network” dialog box to provide computer / work group names. 11 Specify your Computer Name, Workgroup, and Computer Description. (If you do not have the required information, contact your network administrator) 12 Click on “Close” button, and files will copy. 13 Click on the “Yes” button to finish the installation and restart your computer.
3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Version 3.11 3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Version 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress ISA 10MBS Ethernet adapter card and drivers disk Ver. 2.3. • Driver Name: Elnk3.SYS Size: 27KB Date: 7/18/96 • Microsoft Windows NT server 3.51 machine that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
Windows for Workgroups Version 3.11 8 After windows loads, open the “NETWORK” program group, and doubleclick the “Network Setup.” 9 Select the “Networks” button in the “Network Setup” dialog box. 10 Click on the “Install Microsoft Windows Network:” option, and click “OK.” 11 Click the “Drivers” button from the “Network Setup” dialog box, and click on “Add Adapter.” 12 Click “OK” to accept the default choice of “Unlisted or Updated Network Adapter.
3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Version 3.11 21 To complete the installation, click on “Restart Computer” button in the “Windows Setup” dialog box.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • Intel EtherExpress PRO ISA ethernet card and drivers disk Ver. 2.3. • Driver Name: El90X.DOS Size: 45KB Date: 3/21/97 • Microsoft Windows NT Server 3.51 machine that supports Net BEUI,TCP/ IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 10 Click “OK” to the “Network” dialog box to provide computer / work group names. 11 Specify your Computer Name, Workgroup, and Computer Description. (If you do not have the required information, contact your network administrator) 12 Click on the “Configuration” folder in the “Network” dialog box. 13 Click on “Add” and then “Protocol” from “Select Network Component Type”, click on “Add.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.51 Requirements • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. • Intel EtherExpress PRO ISA Ethernet card and drivers disk Ver. 2.3. Driver Name: EPRO.SYS Size: 107KB Date: 7/18/96 • Microsoft Windows NT Workstation 3.51 and Service Pack Media. • Microsoft Windows NT Server 3.51 machine that supports Net BEUI, TCP/ IP,NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 9 Select the “Network” icon, and click “YES” to install NT networking. 10 Insert the Windows NT Workstaion CD. 11 In the “Windows NT Setup”, set the path to your NT files, and click on the “Continue” button.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 Windows NT Workstation Version 4.0 Requirements • HP Vectra with Windows NT Workstation 4.0 Service Pack 3. • Intel EtherExpress PRO/10 ISA ethernet card and drivers disk ver. 3.5. Driver Name: OEMSETUP.INF Size: 33KB Date: 5/12/97 • Microsoft Windows NT Workstation 4.0 and Service Pack Media. (If you have a Hewlett-Packard pre-loaded HDD, the media is located at “C:\I386”) • Microsoft Windows NT Server 3.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 9 Log onto the machine with dministrator privileges. (If you do not have the required information, contact your network administrator) 10 Click on “Start” and move to “Settings”, open the “Control Panel” group and double-click the “Network” Icon. 11 Click on the “Yes” button and agree to install “Windows NT Networking.” 12 With “Wired to the Network” checked, click on “Next.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 27 After “Network has been installed on this computer” click on “Finish. 28 To complete the installation, select “Yes” to reboot your computer.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.
4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version. 3.11 4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version. 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress ISA 10MBS Ethernet adapter card and drivers disk Ver. 2.3. • Driver Name: Elnk3.SYS Size: 27KB Date: 7/18/96 • Microsoft Windows NT server 4.0 machine that supports Net BEUI,Link IPX/SPX, and NWLink NetBIOS transfer protocols.
4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version. 3.11 8 After windows loads, open the “NETWORK” program group, and doubleclick the “Network Setup.” 9 Select the “Networks” button in the “Network Setup” dialog box. 10 Click on the “Install Microsoft Windows Network:” option, and click “OK.” 11 Click the “Drivers” button from the “Network Setup” dialog box, and click on “Add Adapter.” 12 Click “OK” to accept the default choice of “Unlisted or Updated Network Adapter.
4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version. 3.11 21 To complete the installation, click on “Restart Computer” button in the “Windows Setup” dialog box.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • Intel EtherExpress PRO ISA ethernet card and drivers disk Ver. 2.3. • Driver Name: El90X.DOS Size: 45KB Date: 3/21/97 • Microsoft Windows NT Server 4.0 machine that supports Net BEUI,TCP/ IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 10 Click “OK” to the “Network” dialog box to provide computer / work group names. 11 Specify your Computer Name, Workgroup, and Computer Description. (If you do not have the required information, contact your network administrator) 12 Click on the “Configuration” folder in the “Network” dialog box. 13 Click on “Add” and then “Protocol” from “Select Network Component Type”, click on “Add.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.51 Requirements • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. • Intel EtherExpress PRO ISA Ethernet card and drivers disk Ver. 2.3. Driver Name: EPRO.SYS Size: 107KB Date: 7/18/96 • Microsoft Windows NT Workstation 3.51 and Service Pack Media. • Microsoft Windows NT Server 4.0 machine that supports Net BEUI, TCP/ IP,NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 10 Insert the Windows NT Workstaion CD. 11 In the “Windows NT Setup”, set the path to your NT files, and click on the “Continue” button. (If you have an HP preloaded HDD, set path to “C:\I386”) 12 Click on the “Do Not Detect” button from the “ Network Adapter Card Detection” dialog box, and click on “Continue” in the second “Network Adapter Card Detection” dialog box.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 Windows NT Workstation 4.0 Requirements • HP Vectra with Windows NT Workstation 4.0 Service Pack 3. • Intel EtherExpress PRO/10 ISA ethernet card and drivers disk ver. 3.5. Driver Name: OEMSETUP.INF Size: 33KB Date: 5/12/97 • Microsoft Windows NT Workstation 4.0 and Service Pack Media. (If you have a Hewlett-Packard pre-loaded HDD, the media is located at “C:\I386”) • Microsoft Windows NT Server 4.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 9 Log onto the machine with dministrator privileges. (If you do not have the required information, contact your network administrator) 10 Click on “Start” and move to “Settings”, open the “Control Panel” group and double-click the “Network” Icon. 11 Click on the “Yes” button and agree to install “Windows NT Networking.” 12 With “Wired to the Network” checked, click on “Next.” 13 Click on the option to “Select form list” then on “Have Disk.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 27 After “Network has been installed on this computer” click on “Finish. 28 To complete the installation, select “Yes” to reboot your computer.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.
Version Number Intel10 Rev.
