Instruction Manual

Conﬁguring the

Qlogic iSCSI HBA

To conﬁgure the

QLogic iSCSI HBA:

1. Start QLogic S

MS either from the desktop icon or through Start/Programs and connect to localhost

(see Figure 57).

2. Click Yes to start the general conﬁguration wizard (see Figure 58). Use the Wizard to:

• ChooseiSCSIHBAporttoconﬁgure the QLogic iSCSI HBA

•Conﬁgure HBA

Port network settings

•Conﬁgure HBA Por t D NS settings (optional)

•Conﬁgure SLP Target Discovery settings (optional)

•Conﬁgure iS

NS Target Discovery settings (optional)

Figure57Connecttohostscreen

108

Setting up the iSCSI Initiator for multipathing