External Devices Document Part Number: 406856-001 April 2006 This guide explains how to use optional external devices with the computer.
Contents 1 Using a USB device Connecting a USB device . . . . . . . . . . . . . . . . . . . . . . . . Stopping a USB device . . . . . . . . . . . . . . . . . . . . . . . . . . Required USB software . . . . . . . . . . . . . . . . . . . . . . . . . . USB legacy support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2 1–2 1–3 1–3 2 Using a 1394 device Connecting a 1394 device . . . . . . . . . . . . . . . . . . . . . . . . 2–1 Stopping a 1394 device . . . . . . . . . . . . . . . . . . . . . . .
1 Using a USB device Universal Serial Bus (USB) is a hardware interface that can be used to connect an optional external device, such as a USB keyboard, mouse, drive, printer, scanner, or hub, to the computer or to an optional docking device. A hub provides additional USB ports for the system and can be connected to the computer or to another hub. The computer has 3 standard USB ports that support USB 2.0 and USB 1.1 devices.
Using a USB device Connecting a USB device Ä CAUTION: To prevent damage to the USB connectors, use minimal force to connect a USB device. To connect a USB device to the computer, connect the USB cable for the device to the USB port on the computer. The operating system will issue a sound to indicate that a device has been detected. first time you connect a USB device, the “Found New ✎ The Hardware” message is displayed in the notification area, at the far right of the taskbar.
Using a USB device Required USB software Some USB devices may require additional software, which is usually included with the device. For more information about device-specific software, refer to the manufacturer’s instructions included with the device. USB legacy support USB legacy support (enabled by default) allows you to ■ Use a keyboard, mouse, or hub connected to a USB port on the computer during startup or in a non-Microsoft® Windows® application or utility.
2 Using a 1394 device IEEE 1394 is a hardware interface that can be used to connect a high-speed multimedia or data storage device to the computer. Scanners, digital cameras, and digital camcorders often require a 1394 connection. The computer 1394 port, illustrated below, also supports IEEE 1394a devices. Connecting a 1394 device Ä CAUTION: To prevent damage to the 1394 port connectors, use minimal force to connect a 1394 device.
Using a 1394 device Stopping a 1394 device Ä CAUTION: To prevent loss of information or an unresponsive system, stop a 1394 device before removing it. To stop a 1394 device: 1. Double-click the Safely Remove Hardware icon in the notification area, at the far right of the taskbar. display the Safely Remove Hardware icon, click the ✎ To Show Hidden Icons icon (< or >>) in the notification area. 2. Click the 1394 listing. 3. Click Stop.
3 Using the docking connector The docking connector on the bottom of the computer allows you to connect the computer to an optional docking device. An optional docking device provides additional ports and connectors that can be used with the computer.
© Copyright 2006 Hewlett-Packard Development Company, L.P. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
