Memory Modules

Adding or replacing memory modules

Memory Modules 1–11

12. To insert a memory module:

a. Align the notched edge 1 of the memory module with the

tab in the memory module slot.

To prevent damage to the memory module, hold the

memory module by the edges only. Do not touch the

components on the memory module.

b. With the memory module at a 45-degree angle from the

surface of the memory module compartment, press the

module 2 into the memory slot until it is seated.

c. Press the memory module 3 down, applying pressure to

both the left and right edges of the memory module, until

the retention clips snap into place.