Troubleshooting Guide

10 www.hp.com Troubleshooting Guide
Troubleshooting
Interpreting Diagnostic Lights
This section covers the front panel LED codes that may occur before
or during POST that do not necessarily have an error code or text
message associated with them.
✎
If you see flashing LEDs on a PS/2 keyboard, look for flashing LEDs
on the front panel of the computer and refer to the following table to
determine the front panel LED codes.
✎
Recommended actions in the following table are listed in the order in
which they should be performed.
✎
Replace the system board or power supply only as the last resort.
Computer will not start. Wrong memory modules
were used in the
upgrade or memory
modules were installed
in the wrong location.
1. Review the documentation that
came with the system to
determine if you are using the
correct memory modules and to
verify the proper installation.
2. Observe the LED lights on the
front of the computer. See
“Interpreting Diagnostic Lights”
to determine possible causes.
3. If you still cannot resolve the
issue, contact Customer Support.
Problem Cause Solution