HP Enterprise printers - HP Connection Inspector (white paper)

6
Jetdirect configuration page status
The Jetdirect Configuration page shows the Protected Mode status for HP Connection Inspector
• Yes – Device in protected mode
• No – Device not in protected mode
• N/A – HP Connection Inspector disabled
Syslog Messages
Syslog messages are sent from the device for the following settings changes and events.
HP Connection Inspector configuration changes
Message:
<device type>: HP Connection Inspector enabled; time=”<timestamp>”
user=”<user>” source_IP=”<client computer IP address>” outcome=success
interface=<interface>
Interface(s):
EWS
Syslog severity:
Informational
Explanation:
HP Connector Inspector feature was enabled.
Message:
<device type>: HP Connection Inspector disabled; time=”<timestamp>”
user=”<user>” source_IP=”<client computer IP address>” outcome=success
interface=<interface>
Interface(s):
EWS
Syslog severity:
Informational
Explanation:
HP Connector Inspector feature was disabled.
Message:
<device type>: HP Connection Inspector Protected Mode settings modified;
time="<timestamp>" item=dns_failure_threshold value=<value>
old_value=<old value> user="<user>" source_IP="<client computer IP address>"
outcome=success interface=<interface>
Interface(s):
EWS
Syslog severity:
Informational
Explanation:
The DNS failure threshold setting for the HP Connection Inspector feature was
modified.