HP LaserJet Enterprise, HP PageWide Enterprise - HP Security Event Logging Messaging Reference (white paper)

Chapter 2 Enhanced security event logging 103
Wired
AP
STA
Message:
<device type>: HP Connection Inspector Protected Mode settings modified; time="<timestamp>"
item=monitoring_window value=<value> old_value=<old value> user="<user>"
source_IP="<client computer IP address>" outcome=success interface=<interface>
Interface(s):
EWS
Syslog severity:
Informational
Explanation:
The monitoring window setting for the HP Connection Inspector feature was modified.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<value> - New setting value.
<old value> - Old setting value.
<user> - User who modified the monitoring window setting.
<client computer IP address> - IP address of the client computer that sent the request to modify
the monitoring window setting.
<interface> - Networking interface on the local device that received the request to modify the
monitoring window setting. Possible values are:
Wired
AP
STA
Message:
<device type>: HP Connection Inspector Protected Mode settings modified; time="<timestamp>"
item=protected_mode_duration value=<value> old_value=<old value> user="<user>"
source_IP="<client computer IP address>" outcome=success interface=<interface>
Interface(s):
EWS
Syslog severity:
Informational
Explanation:
The protected mode duration setting for the HP Connection Inspector feature was modified.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<value> - New setting value.
<old value> - Old setting value.
<user> - User who modified the protected mode duration setting.
<client computer IP address> - IP address of the client computer that sent the request to modify
the protected mode duration setting.
<interface> - Networking interface on the local device that received the request to modify the
protected mode duration setting. Possible values are:
Wired
AP
STA
Message:
<device type>: HP Connection Inspector Protected Mode settings modified; time="<timestamp>"
item=number_of_times_in_protected_mode value=<value> old_value=<old value>
user="<user>" source_IP="<client computer IP address>" outcome=success