HP LaserJet Enterprise, HP PageWide Enterprise - HP Security Event Logging Messaging Reference (white paper)

Chapter 2 – Enhanced security event logging 106
IPsec/Firewall
IPsec/Firewall policy
Message:
<device type>: IPsec/Firewall enabled; time="<timestamp>" user=“<user>“ source_IP="<client
computer IP address>" outcome=success interface=<interface>
Interface(s):
EWS
Syslog severity:
Warning
Explanation:
The IPsec/Firewall policy was enabled.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<user> - User who enabled the IPsec/Firewall policy.
<client computer IP address> - IP address of the client computer that sent the request to enable
the IPsec/Firewall policy
<interface> - Networking interface on the local device that received the request to enable the
IPsec/Firewall policy. Possible values are:
• Wired
• AP
• STA
Message:
<device type>: IPsec/Firewall disabled; time="<timestamp>" user=“<user>“ source_IP="<client
computer IP address>" outcome=success interface=<interface>
Interface(s):
EWS, telnet
Syslog severity:
Warning
Explanation:
IPsec/Firewall policy was disabled.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<user> - User who disabled the IPsec/Firewall policy.
<client computer IP address> - IP address of the client computer that sent the request to disable
the IPsec/Firewall policy
<interface> - Networking interface on the local device that received the request to disable the
IPsec/Firewall policy. Possible values are:
• Wired
• AP
• STA
Message:
<device type>: IPsec/Firewall disabled; time="<timestamp>" user=“<user>“ source_IP="<client
computer IP address>" outcome=success interface=<interface>
Interface(s):
SNMP
Syslog severity:
Warning
Explanation:
The IPsec/Firewall policy was disabled.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<user> - Current EWS user.