HP LaserJet Enterprise, HP PageWide Enterprise - HP Security Event Logging Messaging Reference (white paper)

Chapter 1 – Introduction 3
Purpose
The purpose of this document is to describe the syslog messages generated for auditable events by HP
imaging and printing devices running HP FutureSmart firmware.
The following table describes the structure of this document.
Table 1-1 HP Security Event Logging Messaging Reference for Interfacing with Security Information and Event
Management Systems
Chapter
Description
Introduction
This chapter describes the intent and focus of this document, and how to
configure and enable logging.
Enhanced security event logging
This chapter describes the syslog messages for enhanced security event
logging.
Non-enhanced security event
logging
This chapter describes the syslog messages for non-enhanced security
event logging.
Configure and enable logging
The steps in this section describe how to configure and enable logging. All steps are performed using the
embedded Web server (EWS) running on the device.
How to open the EWS
1. Open a Web browser.
2. In the Address or Go to field, type the IP address that is assigned to the device (for
example; http://192.168.1.1) or the host name (for example; http://www.[your_server].com).
If you do not know the IP address or hostname for the device, you can view this information at the product
control panel. To view the IP address and hostname of the device at the product control panel, touch the
Information button, then select Ethernet.
Configure and enable logging
1. Open the EWS.
2. Click the Networking tab.
3. Select the Other Settings menu.
4. Click Misc. Settings tab.
5. From the Syslog Facility drop-down menu, select the syslog facility used by the syslog server to
classify syslog messages from imaging and printing devices.
NOTE: The default syslog facility set on the device is LPR.