HP LaserJet Enterprise, HP PageWide Enterprise - HP Security Event Logging Messaging Reference (white paper)

Chapter 1 – Introduction 4
6. Click Apply.
7. Select the TCP/IP Settings menu.
8. Click the Advanced tab.
9. In the Syslog Server field, enter the IPv4 address of the syslog server.
NOTE: Non-enhanced security event logging is enabled when the syslog server address is set.
10. From the Syslog Protocol drop-down menu, select the transport protocol used by the syslog server
for receiving syslog messages.
11. In the Syslog Port field, enter the port number of the port used by the syslog server for receiving
syslog messages.
12. Optionally, in the Syslog Maximum Messages field, enter the maximum number of syslog messages
the device should process per minute.
NOTE: It is highly recommended that Syslog Maximum Messages be set to 1000 to help prevent syslog
messages from getting discarded by the device during periods in which a large number of syslog messages are
generated in a short amount of time.
13. Optionally, in the Syslog Priority field, enter 7 to ensure syslog messages for all auditable events are forwarded
to the syslog server.
NOTE: The Syslog Priority setting can be used to filter syslog messages or to disable syslog.
For example; to configure the device to only forward syslog messages with a syslog severity of 5 or lower, set
the Syslog Priority setting to 5.
Syslog is disabled when the Syslog Priority setting is set to 8.
14. Check the Enhanced security event logging checkbox.
15. Click Apply.