HP LaserJet Enterprise, HP PageWide Enterprise - HP Security Event Logging Messaging Reference (white paper)

Chapter 2 – Enhanced security event logging 123
• STA
Message:
<device type>: IPsec policy modified; time="<timestamp>" policy_name="<name>" item=Key
remote_identity_authentication_option=Pre-Shared_Key remote_identity_type="<remote
identity type>" user=”<user>” source_IP="<client computer IP address>" outcome=success
interface=<interface>
Interface(s):
EWS
Syslog severity:
Warning
Explanation:
The pre-shared key contained in an IKEv2 IPsec policy was modified.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<name> - IPsec policy name.
<remote identity type> - Identity type the local device will use to identify the IPsec peer. Possible
values are:
• Distinguished_Name
• FQDN
• E-mail
• IP_Address
• Key-ID
<user> - User who modified the IPsec policy.
<client computer IP address> - IP address of the client computer that sent the request to modify
the IPsec policy.
<interface> - Networking interface on the local device that received the request to modify the
IPsec policy. Possible values are:
• Wired
• AP
• STA
Message:
<device type>: IPsec policy modified; time="<timestamp>" policy_name="<name>"
item=remote_identity_authentication_option value=<value> old_value=<old value>
remote_identity_type="<remote identity type>" user=”<user>” source_IP="<client computer IP
address>" outcome=success interface=<interface>
Interface(s):
EWS
Syslog severity:
Warning
Explanation:
The remote identity authentication option in an IKEv2 IPsec policy was modified.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<name> - IPsec policy name.
<value> - Authentication method the local device will use to authenticate the IPsec peer. Possible
values are:
• Pre-Shared_Key
• Certificates
<old value> - Previous authentication method the local device used to authenticate the IPsec peer.
Possible values are:
• Pre-Shared_Key
• Certificates
<remote identity type> - Identity type the local device will use to identify the IPsec peer. Possible
values are: