HP LaserJet Enterprise, HP PageWide Enterprise - HP Security Event Logging Messaging Reference (white paper)

Chapter 2 – Enhanced security event logging 11
Possible values also include the names of third-party authentication agents installed on the
device.
<user> - Attempted user identity.
WS authentication
Message:
<device type>: WS Sign In Authentication; time="<timestamp>" sign-in_method=local_device
user="<user>" source_IP="<client computer IP address>" outcome=failure
Interface(s):
WS*, OXPd
Syslog severity:
Warning
Explanation:
HTTP Basic authentication failed.
This message is generated when HTTP Basic authentication of an HTTP request containing a WS
message fails.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<user> - Attempted user identity.
<client computer IP address> - IP address of the client computer that sent the HTTP request.
SNMPv3 authentication
Message:
<device type>: SNMPv3 authentication failed; time="<timestamp>" user="SNMPv3\<user>"
source_IP=“<client computer IP address>“ outcome=failure interface=<interface>
Interface(s):
SNMPv3
Syslog severity:
Warning
Explanation:
Authentication of a received SNMPv3 packet failed.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<user> - Attempted SNMPv3 user identity.
<client computer IP address> - IP address of the client computer that sent the SNMPv3 request.
<interface> - Networking interface on the local device that received the SNMPv3 request. Possible
values are:
• Wired
• AP
• STA
Telnet sign in
Message:
<device type>: Telnet Sign In Authentication; time="<timestamp>" user="Administrator"
source_IP="<client computer IP address>" outcome=failure interface=<interface>
Interface(s):
Telnet
Syslog severity:
Warning
Explanation:
A user unsuccessfully attempted to sign in to the device via telnet.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.