HP LaserJet Enterprise, HP PageWide Enterprise - HP Security Event Logging Messaging Reference (white paper)

Chapter 2 – Enhanced security event logging 19
Syslog severity:
Informational
Explanation:
The data integrity test was performed.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<client computer IP address> - IP address of the client computer that sent the request to perform
the data integrity test.
<test result> - Result of the test. Possible values are:
• success
• failure
Code integrity test
Message:
<device type>: Verify CRC for Code Integrity Check; time="<timestamp>" source_IP="<client
computer IP address>" outcome=<test result>
Interface(s):
EWS
Syslog severity:
Informational
Explanation:
The code integrity test was performed.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<client computer IP address> - IP address of the client computer that sent the request to perform
the code integrity test.
<test result> - Result of the test. Possible values are:
• success
• failure
Secure erase
Erase drive
Message:
<device type>: Erase Drive requested; time="<timestamp>" erase_mode=<mode>
drive_name=“<drive name>“ source_IP="<client computer IP address>" outcome=success
Interface(s):
EWS, WS*
Syslog severity:
Informational
Explanation:
A request to erase a storage drive was made.
Message:
<device type>: Generate CRC for Code Integrity Check; time="<timestamp>"
reference_point="<reference point>" source_IP="<client computer IP address>" outcome=success
Interface(s):
EWS
Syslog severity:
Informational
Explanation:
A point of reference for the code integrity test was set.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<reference point> - Date and time of the CRC checksum creation plus the CRC checksum. Example:
3/23/2016 12:25:22 PM (8D-9A-72-9C)
<client computer IP address> - IP address of the client computer that sent the request to set a
reference point.