HP LaserJet Enterprise, HP PageWide Enterprise - HP Security Event Logging Messaging Reference (white paper)

Chapter 2 – Enhanced security event logging 24
<timestamp> - see Table 2-2.
<authentication option> - Authentication method that was used by both the local device and the
IPsec peer to perform mutual authentication during IKEv1 phase 1 negotiations. Possible values
are:
• Certificates
• Pre-shared_key
• Kerberos
NOTE: If both the local device and the IPsec peer used Kerberos to perform mutual authentication,
this message is not generated.
<local device IP address> - IP address of the local device.
<IPsec peer IP address> - IP address of the IPsec peer.
Message:
<device type>: IPsec IKEv1 phase 2 negotiation; time="<timestamp>" item=printer_role
value=Initiator source_IP="<local device IP address>" destination_IP="<IPsec peer IP address>"
outcome=failure Reason=<reason for failure>
Interface(s):
IPsec
Syslog severity:
Warning
Explanation:
IKEv1 phase 2 negotiations initiated by the local device failed.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<local device IP address> - IP address of the local device.
<IPsec peer IP address> - IP address of the IPsec peer.
<reason for failure> - see Table 2-3.
IKEv2 phase 1 negotiations
Message:
<device type>: IPsec IKEv2 phase 1 negotiation; time="<timestamp>"
local_authentication_option=<local authentication option>
remote_authentication_option=<remote authentication option> item=printer_role
value=Responder source_IP="<IPsec peer IP address>" destination_IP="<local device IP address>"
outcome=success
Interface(s):
IPsec
Syslog severity:
Warning
Explanation:
IKEv2 phase 1 negotiations initiated by the IPsec peer were successful.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<local authentication option> - Authentication method that was used by the IPsec peer to
authenticate the local device. Possible values are:
• Certificate
• Pre-Shared_Key
<remote authentication option> - Authentication method that was used by the local device to
authenticate the IPsec peer. Possible values are:
• Certificate
• Pre-Shared_Key
NOTE: If both the local device and the IPsec peer used pre-shared key to perform mutual
authentication, this message is not generated.