HP LaserJet Enterprise, HP PageWide Enterprise - HP Security Event Logging Messaging Reference (white paper)

Chapter 2 – Enhanced security event logging 26
<timestamp> - see Table 2-2.
<local device IP address> - IP address of the local device.
<IPsec peer IP address> - IP address of the IPsec peer.
<reason for failure> - see Table 2-3.
IKEv2 phase 2 negotiations
Message:
<device type>: IPsec IKEv2 phase 2 negotiation; time="<timestamp>"
local_authentication_option=<local authentication option>
remote_authentication_option=<remote authentication option> item=printer_role
value=Responder source_IP="<IPsec peer IP address>" destination_IP="<local device IP address>"
outcome=success
Interface(s):
IPsec
Syslog severity:
Warning
Explanation:
IKEv2 phase 2 negotiations initiated by the IPsec peer were successful.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<local authentication option> - Authentication method that was used by the IPsec peer to
authenticate the local device during IKEv2 phase 1 negotiations. Possible values are:
• Certificate
• Pre-Shared_Key
<remote authentication option> - Authentication method that was used by the local device to
authenticate the IPsec peer during IKEv2 phase 1 negotiations. Possible values are:
• Certificate
• Pre-Shared_Key
NOTE: If both the local device and the IPsec peer used pre-shared key to perform mutual
authentication during IKEv2 phase 1 negotiations, this message is not generated.
<IPsec peer IP address> - IP address of the IPsec peer.
<local device IP address> - IP address of the local device.
Message:
<device type>: IPsec IKEv2 phase 2 negotiation; time="<timestamp>" item=printer_role
value=Responder source_IP="<IPsec peer IP address>" destination_IP="<local device IP address>"
outcome=failure Reason=<reason for failure>
Interface(s):
IPsec
Syslog severity:
Warning
Explanation:
IKEv2 phase 2 negotiations initiated by the IPsec peer failed.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<IPsec peer IP address> - IP address of the IPsec peer.
<local device IP address> - IP address of the local device.
<reason for failure> - see Table 2-3.
Message:
<device type>: IPsec IKEv2 phase 2 negotiation; time="<timestamp>"
local_authentication_option=<local authentication option>