HP LaserJet Enterprise, HP PageWide Enterprise - HP Security Event Logging Messaging Reference (white paper)

Chapter 2 Enhanced security event logging 27
remote_authentication_option=<remote authentication option> item=printer_role value=Initiator
source_IP="<local device IP address>" destination_IP="<IPsec peer IP address>" outcome=success
Interface(s):
IPsec
Syslog severity:
Warning
Explanation:
IKEv2 phase 2 negotiations initiated by the local device were successful.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<local authentication option> - Authentication method that was used by the IPsec peer to
authenticate the local device during IKEv2 phase 1 negotiations. Possible values are:
Certificate
Pre-Shared_Key
<remote authentication option> - Authentication method that was used by the local device to
authenticate the IPsec peer during IKEv2 phase 1 negotiations. Possible values are:
Certificate
Pre-Shared_Key
NOTE: If both the local device and the IPsec peer used pre-shared key to perform mutual
authentication during IKEv2 phase 1 negotiations, this message is not generated.
<IPsec peer IP address> - IP address of the IPsec peer.
<local device IP address> - IP address of the local device.
Message:
<device type>: IPsec IKEv2 phase 2 negotiation; time="<timestamp>" item=printer_role
value=Initiator source_IP="<local device IP address>" destination_IP="<IPsec peer IP address>"
outcome=failure Reason=<reason for failure>
Interface(s):
IPsec
Syslog severity:
Warning
Explanation:
IKEv2 phase 2 negotiations initiated by the local device failed.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<local device IP address> - IP address of the local device.
<IPsec peer IP address> - IP address of the IPsec peer.
<reason for failure> - see Table 2-3.
IPsec ESP
Message:
<device type>: IPsec using ESP failed; time="<timestamp>" source_IP="<IPsec peer IP address>"
destination_IP="<local device IP address>" outcome=failure
Interface(s):
IPsec
Syslog severity:
Warning
Explanation:
The processing of a received IPsec ESP packet failed.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<IPsec peer IP address> - IP address of the IPsec peer.
<local device IP address> - IP address of the local device.