HP LaserJet Enterprise, HP PageWide Enterprise - HP Security Event Logging Messaging Reference (white paper)

Chapter 2 – Enhanced security event logging 50
Device configuration
Syslog
Message:
<device type>: Syslog settings modified; time="<timestamp>" user="<user>" source_IP="<client
computer IP address>" outcome=success interface=<interface>
Interface(s):
EWS, SNMP
Syslog severity:
Warning
Explanation:
A syslog setting was modified.
This message is generated when any of the following syslog settings are modified:
• Syslog server IP address
• Syslog protocol
• Syslog port
• Syslog maximum messages
• Syslog priority
• Syslog facility
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<user> - User who modified the syslog setting.
<client computer IP address> - IP address of the computer that sent the request to modify the
syslog setting.
<interface> - Networking interface on the local device that received the request to modify the
syslog setting. Possible values are:
• Wired
• AP
• STA
Jetdirect logging
Message:
<device type>: Jetdirect logging started; time="<timestamp>" user="<user>" source_IP=“<client
computer IP address>“ outcome=success interface=<interface>
Interface(s):
EWS
Syslog severity:
Notice
Explanation:
Jetdirect logging was enabled.
This message is generated when the syslog server IP address is set and enhanced security event
logging is enabled.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<user> - User who set the syslog server IP address and enabled enhanced security event logging.
<client computer IP address> - IP address of the client computer that sent the request to set the
syslog server IP address and enable enhanced security event logging.
<interface> - Networking interface on the local device that received the request to set the syslog
server IP address and enable enhanced security event logging. Possible values are:
• Wired
• AP
• STA